3DS Electric Reciprocating Pump with 13m³/h flow rate at 6Mpa
pressure
I. Application
The high-pressure pump mainly supplies high-pressure liquid for
hydraulic machine or accumulator, pressure vessel pressure test,
sewer de-scaling, dredging, cleaning, etc., and can also transport
high-pressure liquid. They are widely used for transferring clean
water and some corrosive liquids.
II. Brief structural description
The product consists of motor the driver and pump mounted on a
steel baseplate.
The rotary motion of the motor is converted the reciprocating
motion of plungers by using gearing crankshaft and con-rod
mechanism some products are reduced speed by belts. The
transmission part consists of the gear shaft, crankshaft,
connecting rod and cross-heed.
The liquid end consists of the cylinder, suction and discharge
valves, sealed stuffing boxes and the relief valve, which are made
of stainless steel or steel. A pressure gage installed at the
discharge pipe is used to show the operating condition of the pump.
III. Specification of 3DS(T)3
Note: Model 3DT3 is for corrosive liquids.
IV. Supply Range
A. Pump B. Motor C. Base Plate
D. Spare parts accessory and special tools
E. Drawing and technical documents
V. Spare parts
Plunger, valve seat, valve spring,vale,valve spindle,valve seat,
V-seal ring
