15m 50m Infrared Flame Detector , Ultraviolet Flame Detector

The MIC200-UV/IR2 flame detector combines the latest ultraviolet and dual infrared detection technologies to provide fast, accurate, and reliable fire detection, as well as improved anti-interference against the wrong light source to effectively detect flames from a longer distance. The MIC200-UV/IR2 detector is equipped with two infrared sensors and one ultraviolet sensor, which has the advantages of fast reaction time and high sensitivity.

The MIC200 - UV/IR2 Flame Detector monitors for radiation emitted by a flame in both the ultraviolet (UV) and infrared (IR) spectral ranges. This UV/IR2 combination provides a fast response time and increased false alarm immunity against sources of radiation for reliable protection.

The MIIC200 - UV/IR2 flame detector provides ultra-fast response, high performance and reliable detection of a large variety of fires including hydrocarbon fires (visible and nonvisible), as well as Hydrogen fires.
The detector addresses slow growing fires as well as fast eruptions of fire using improved UV/IR technology. The detector operates in all weather and light conditions.

Depending on the user's sensitivity and delay time, the MIC200-UV/IR2 detector can effectively eliminate false positives and is adapted for use in high-risk industrial environments. In addition to the general application, it is especially suitable for railway locomotive fire extinguishing, military armored vehicles and ships explosion suppression, hydrogen combustion flame. The explosion-proof case of the MIC200-UV/IR2 detector can be firmly and accurately installed both indoors and outdoors. The highlighted LED can show the status of the detector, and its automatic testing function can ensure that the detector can fully play its function at any time.

• High immunity to false alarm
• Hydrogen and Hydrocarbons flame detection
• Ultra-fast detection mode detection within 5 -10s for fireballs or explosions
• High sensitivity – up to 50m n-heptane pan fire
• Data/Event logger – alarms, faults and other relevant events are logged to non-volatile memory
• Automatic and manual internal self-test of window cleanliness and the overall operation of the detector
• Window heater to avoid condensation and icing
• Tilt mounting bracket can be connected either above or below the detector
• UV and IR warning levels – 4-20mA – Current output warning when elevated UV or IR radiation is detected
• FM hazardous area and performance Approved
• ExdII CT6 explosion-proof grade, suitable for zone 1 and zone 2 hazardous locations

This fast-acting technology is ideal for difficult-to-protect applications such as:

• production areas
• tank farms and product storage
• loading and unloading facilities
• hazard waste treatment and storage
• processes with high temperatures, pressure and flammable fuels
• pump rows
• manifolds
• hot oil systems
• rail car loading racks
• hydrocarbon filling and storage areas
• chemical storage tanks
• aircraft hangars

There are two main flame-sensing technologies used today: ultraviolet/infrared and multi-spectrum infrared (MSIR). A UV/IR flame detector consists of an ultraviolet (UV) and infrared (IR) sensor paired together within a single instrument. While the UV sensors detect the UV radiation-emitted flames, the IR sensors monitor the infrared emission spectral band around the 4.3 to 4.4 micron range – the predominant radiant emission band for hydrocarbon-fueled fires.

The only alarm source shared between the two sensing technologies is a real hydrocarbon fire – a key benefit of UV/IR detectors. Adding advanced signal processing algorithms ensures this combination detector delivers outstanding performance to a wide range of flammable liquids, gases, and volatile solids while simultaneously providing enhanced false alarm immunity far superior than either a UV or IR sensor alone.

HiYi Techonology is a professional company of committed to the development of the gas detection industry, has more than 15-year experience in specializing in the research, development, manufacture and sale of gas detectors.

With the strong technical force and economic strength, company is constantly developing new products with the international advanced technology level.

We are ready for supplying professional and exact technical service and designing projects to meet local customer's needs. The independent technology from sensors to detectors enables us to afford one-stop gas detection solution service all over the world.

We always concentrate on enhancing the communication with customers, developing international cooperation, and participating in the international competition by attending many professional exhibitions all over the world ever year.

Our products can be divided into High-end Laser Methane Detector，Domestic Gas Alarms, Portable Gas Detectors, Industrial Fixed Systems, Gas analyzers, as well as gas sensors and key elements for gas detection. The products have obtained the certificates of CE, TUV, ATEX, and RoHS, and are widely used in industrial fields.

Around IOT industry, we will combine sensors, intelligent terminal, communication technology, cloud computing and geographic information IOT technology together closely, establish a complete IOT industry chain.

We are focus on the customer value oriented, combine treatment of environmental protection with energy saving technology, provide perfect solutions for smart city, production safety, environmental protection, health of the people's livelihood. Creating value for customers is our forever pursuit.

Product Certification Certificate

cooperative enterprise

Company Team

Development workshop

Freight house