Reinforced Cleated Heavy Duty Conveyor Durable Tough High Tensile Strength

Cleated Conveyor Belt Sidewall Belt Conveyor Inclined Slop Claming Belt Machine

General

This Sidewall belt conveyor with corrugated shield, in particular applied in conveying material in big inclination, for it with corrugated shield and horizontal clapboard belt. And it can widely used in coal, metallurgy, chemical industry, light industry, petroleum, port, mechanical etc to convey all kinds of bulk materials and the piece.

Density of handled bulk materials 500~2500kg/m3, max inclination is 90°, max lump size is 550mm, lump of handled should depends on belt width, belt speed, clapboard height and inclination.

Ambient temperature generally -25~+40℃, material temperature to be handled should be under 50℃. It should take other measures for special requirement such as heat resistant, proof cold, resistant retard, resistant acid and alkali, resistant abrasion, proof explosion, proof water etc.

Advantages And Features

• Adopt corrugated flang belt, the max angle can be 90 degree, save place;
• Simple structure and easy maintenance;
• Sidewall belt conveyor have two horizontal parts , can connect with other machine easily;

• No spillage at the steep angle when transfer bulk material.

Application

• Continuous conveying equipment for general purpose bulk materials

• Widely used in coal, chemical industry, building materials, metallurgy, electric power, light industry, food, port, shipping and other industries.

• In the working environment that the humidity is -15 degree to +40 degree, transport a variety of bulk materials which density is 0.5-2.5t/m3.

• Max inclined angle is 90°, max pellets size is 550mm.

Technical parameters for reference

Remarks: the below capacity is based on coal and speed 1m/s to caculated for reference.

Operation regulation and maintenance

• Belt conveyor should be operated in according to design requirement.

• Belt conveyors are not allowed to overload run.

• All safe alarming should be in good condition.

• Walkway of emergency switch should be free. The switch should be regular inspected to see whether they are in good condition.

• All transition load point should have enough light facilities.

• Fence should be provided under gravity type tensioning devices and the area where man easily access.