Compact Structure Horizontal Belt Conveyor Low Noise High
Efficiency Easy Operation
General
This Sidewall belt conveyor with corrugated shield, in particular
applied in conveying material in big inclination, for it with
corrugated shield and horizontal clapboard belt. And it can widely
used in coal, metallurgy, chemical industry, light industry,
petroleum, port, mechanical etc to convey all kinds of bulk
materials and the piece.
Working Principles
The horizontal loading section leads a deflection wheel bends the
belt into the feeding of the bulk material takes place on a mostly
horizontal feed path, where the side wall belt is supported by
loading impact idlers. The feeding of the conveyed material can be
achieved by direct feeding from a hopper, over a chute, a feeding
belt or a feeding pulley. The selection of the optimum feeding
station depends on the properties of the bulk material and the belt
speed of the vertical conveyor. The upward and downward strands are
encased from the bottom to the top. Substructures or support
rollers are not necessary in this section.
The vertical section leads over a deflection curve into the
horizontal discharge section. The deflection curve is made up of a
number of high specification pulleys. These pulleys experience the
vectored load of deflecting the belt tension from vertical to
horizontal.
At the drive pulley, the bulk material is discharged and the belt
is returned to the back going strand. Depending on the bulk
material properties, the drive pulley is followed by a beater wheel
for belt cleaning in the return side. The beater is self-driven.
Material that fails from the belt goes into the main delivery
chute. Lateral deflection wheels turn the belt from the horizontal
back to the vertical.
Advantages
- Widely used, can transfer all kinds of bulk material in different
angles and directions.
- No transfer points- the belt are capable of turning at any angle
right from feed hopper to discharge point
- No spillage at the steep angle when transfer bulk material.
Maximum utilization of space – able to convey material at angles up
to 90 degree, able to instead of bucket elevator.
Low power requirement, low cost, long service life and quiet smooth
running.
Application
Sidewall belt conveyor is one of the most commonly used mining
equipment, which is widely used in mineral processing, construction
materials, silicate and chemical industries. In the production of
small scale, medium scale or large scale mineral processing Plants,
it is generally used as the transportation machine for metal ores
of gold, silver, copper, lead, zinc, nickel, manganese, iron,
molybdenum , chromium, tin and others, as well as stone, rock,
granite, limestone, quartz, graphite, feldspar, coal, etc.
Technical parameters for reference
Remarks: the below capacity is based on coal and speed 1m/s to
caculated for reference.
| Bandwidth | 1000mm |
| Cleats hight | 160mm | 200mm | 240mm |
| Pitch of cleats | 126mm | 376mm | 252mm | 378mm | 504mm | 252mm | 378mm | 504mm |
| Slop | 30 degree | 186 t/h | 129 t/h | - | 207 t/h | 159 t/h | - | 283 t/h | 229 t/h |
| 40 degree | 150 t/h | 99 t/h | - | 160 t/h | 122 t/h | - | 231 t/h | 176 t/h |
| 50 degree | 120 t/h | 79 t/h | 79 t/h | 112 t/h | - | - | 185 t/h | 141 t/h |
| 60 degree | 98 t/h | 64 t/h | 64 t/h | 105 t/h | - | 229 t/h | 151 t/h | - |
| 70 degree | 80 t/h | 52 t/h | 52 t/h | 85 t/h | - | 287 t/h | 123 t/h | - |
| 90 degree | 49 t/h | - | - | 52 t/h | - | 115 t/h | 76 t/h | - |
