Touch Screen Xenon Lamp Aging Environment Test Chamber Programable
Cycle Test
Main functions:
The samples exposed to high temperature are tested by light and
humidity cycle to simulate dew and rain. The external conditions
and components of the instrument deteriorate and damage in a few
days or weeks, and the sun shading film, color change Including
crack, crack, wrinkle, foam, paint, strength loss, oxidation, etc.
ZL-6011A xenon lamp weather-resistant testing mac...
Main feature:
Xenon lamp (vertical weather resistance) test case high quality
electrostatic sprayed plastic or stainless steel container for cold
rolled steel plate.The radiation source is a xenon lamp in the
solar spectrum, which can automatically record the radiation
intensity and correctly record the workbench temperature.Adjust the
irradiation period, dark period and spray period.It can be adjusted
according to relevant test standards or customer
requirements.Select input touch screen control unit or intelligent
digital controller.
Xenon lamp weatherability test chamber contains ultraviolet
radiation sensor.It can change the change of light energy such as
aging tube.Ultraviolet radiation sensors are permitted.The UV
sensor keeps the radiation intensity within the working value by
continuously monitoring the internal light and adjusting the
performance of the tube.
Spray cycle can effectively simulate temperature change and
rainfall erosion.Due to the good control of rainwater, the coating
(including color and color) on the wood surface may be
eroded.Therefore, the material is directly exposed to ultraviolet
and underwater.The function of the shower reproduces this
environmental condition and can improve the color and climate aging
test.
Equipment summary:
Xenon lamp aging testing machine is a comprehensive climate testing
machine, in addition to climatic aging test, the lightfastness of
materials can be carried out to test, polymer materials exposed at
simulated sunlight. It simulates the light, temperature, rainfall,
condensing, humidity to test the materials; it can be used for
choosing new materials, improving existing materials, or assessment
of change in material composition;
Technical parameter:
| Model | ZL-6011A |
| Testing room D×W×H | 500*600*500mm |
| Index | Temperature range | RT+10℃~80℃ |
| Humidity range | 65～98%R·H |
| Spray time | 1～9999min, adjustable |
| Spray cycle | 1-240min, interval adjustable |
| spectral wavelength | 290nm～800nm(550w/m2) |
| light source | xenon lamp(air-cooled) |
| Xenon lamp power | 1kw,option: 1.8kw(longevity:1600H) |
Temperature and humidity control | Time controller | Import controller from Moeller |
| Accurate range | Temperature: ±0.1℃,/ humidity: ±0.1℃R·H |
| Sensor | Platinum resistance Pt100Ω/mv |
| Heating system | Independent system, nickel chromium alloy electric heating type
heater |
| Humidity system | stainless steel, external Isolated humidifier |
| Blackboard temperature | Bimetal thermometer blackboard 55℃~75℃ |
| Water supply | Humidification water supply with automatic control, xenon lamp
cooled by water recycling |
| Temperature controller | Import controller |
| humidity | Irradiation: 30%~65%RH darkly: up to 90%RH |
| Cycle system | low-noise air-conditioning-type motors, multi-leaf-type centrifugal
wind wheel |
| Material | Outside material | Advanced spray color plate /SUS304 stainless steel |
| Inside material | SUS304 stainless steel |
| Sample holder material | SUS304 stainless steel |
| nsulation | High and low temperature aging of silicone rubber |
| Standard | a set of radiation-proof glass window, dynamic testing sample shelf
1, xenon lamp tube 2 |
| Protector | Leakage, short circuit, over-temperature, water shortages, motor
overheating, over-current protection. |
| Power | AC380V±10% 50±0.5HZ , Three-phase five-wire system |
| Environmental temperature | ±5℃～+30℃ ≤85%R·H |
Operating conditions:
1. Temperature:15℃~35℃
2. Relative humidity: less than 85%RH
3. Without strong vibration and strong electromagnetic field
4. Without high concentration of dust and corrosive materials in
round field
5. No direct sunlight or other sources of heat radiation directly
6. Without a strong airflow around,when need forced air flow
around,air should not be blown directly to the body
7. Test cases should be placed stably, level
8. The sides of the test chamber should keep a certain distance,
convenient maintenance operation.
9. Installation site well ventilated
10. Ground Benign
Test chamber:
◆ This test box adopts an integrated structure. The upper left part
of the box is the working room, the upper right part is the
electrical control room, and the lower part is the compressor
refrigeration unit. The sample rack mechanical speed device, the
xenon lamp condensate tank, the water pump and other various
implementing devices, electrical control The cabinet is placed on
the right side of the test box for easy operation.
◆ The inner wall of the test box is made of SUS304# stainless steel
plate.
◆ The insulation material of the box body is made of polyurethane
foam and ultra-fine glass fiber, which has a good insulation
effect. The outer surface of the test box is free from frost and
condensation.
◆ There is a condensate drain at the bottom of the box
◆ The door frame adopts environmentally friendly silicone rubber
sealing strip that can withstand high and low temperatures for a
long time.
◆ There is a glass observation window on the front of the box, and
there is a protective film on the window to prevent the eyes from
being damaged by the xenon lamp.
Gas circulation part:
With built-in airway and circular fan, effective cooling and energy
control is introduced to achieve an effective heat exchange of high
fans, to improve the air flow, to achieve the goal of temperature
change and to increase the air volume by adjusting the blue
opening.The heat exchanging capacity of the air humidifier and
cooler is heated and the uniformity of temperature and humidity is
greatly improved.
Use environment:
Temperature: 5℃～+35℃
Humidity: ≤85%RH
(please strictly request environmental conditions for long-term
storage)
