Real-time and High-precision Cylinder pressure tester
Introduction:
ZL-3021B Cylinder outside the test pressure test bench is the
reference standard GB / T 9251-2011 Cylinder pressure test method
and CGA C-1 "compressed gas cylinders of water pressure test
method" in the cylinder pressure test method, Test device and
method of operation.
The device is developed in strict accordance with China's cylinder
water pressure test standard and American DOT standard.
Compared with the traditional manual external measurement device,
the computer controlled external measuring device has the
advantages of real-time and high-precision data acquisition. Can be
real-time data display, after the test save, query and other
functions.
The production of water pressure test cylinder cylinders, which are
widely used in fire cylinders, breathing cylinders, cylinders of
mixed gas, natural gas cylinders, high pressure vessels and other
equipment, water pressure test. With automatic data acquisition,
automatic control, print the annual test report of the cylinder
test. Widely used in various scientific research institutes, the
export of military testing cylinders, fire factories and other
places need to test the cylinder pressure.
Piping system using non-welded connection. Test fluid system and
drive fluid system separation, easy to test pressure control and
test media diversification. computer control. The sampling data of
high-speed sampling card are adopted. To meet the different
installation of the specimen hose.
Technical Parameters:
1.Test medium :water
2.Test pressure :0-40MPa
3.Pressurized flow low pressure :1.2L / min
4.Driving pressure :0.2-0.8MPa
5.Driving flow :0.3-1 cubic meters / minute
6.Time display :computer display
7.Pressure curve display :data acquisition software real-time
display, you can put shrink
8.Print Report :When the test is completed, a test report can be
printed and the test data saved
Save the test data can save the report and excel test table, no
time to collect the data can be saved
9.Display accuracy :0.1MPa
10.Control accuracy :0.5%
Use Conditions:
1. Power supply: AV200V 50HZ single phase
2. Air source: dry and clean air 0.8 ~ 1.0MPa, 1m³ / min
3. Experimental water: clean fresh water
4. Ambient temperature: 1 ~ 40 ℃
5. Relative humidity: <85%
Others:
1. Water jacket cavity specifications: Ф specific size of the
cylinder set
2. Pressure test pressure: <40MPa
3. Equipped with test pump Model: MA80 gas drive pump
4. Test pressure pump pressure ratio: 80: 1
5. Test pressure pump discharge flow: 1.3L / min (200bar)
6. Pressure sensor: Range 0 ~ 40MPa (4 ~ 20mA)
7. Equipped with electronic balance: Range 0 ~ 1000g / 0.1g
8. Water jacket compression cylinder: expansion sleeve to tighten
(single station).
9. Working air pressure: 0.5 ~ 0.8MPa
10. Maximum air consumption: 1m ³ / min
11. Power supply: AC220V / 50HZ
