Standard:
GB31241-2014,IEC62133,UL1642,UL2054,QC/T743-2006,QC/T744-2006,GB8897.4-2002,IEC60086-4,SN/T1414,SN/T1413,YD1628,GJB2374,QB/T2052,IEC62133-2012,SAE-J2464,GB31241,YD/B
032-2009,YD/T 2344.1-2011,GB/T18332-2009,MT/T1051-2007
Test Purpose:
1.Clamp down through the vise or hydraulic pressure cylinder with
cylindrical piston , make the single battery or battery unit be
squeezed between the two planes. Continue to squeeze,don’t stop
until the pressure reached about 13kN. Safety performance of the
battery should be examined by squeezing test.There should be no
fire breaking out, no explosion during the test. The testing
equipment is also essential to the battery manufacturers and
research laboratory.
2.For the simulation of single battery in process of use, storage,
transportation, inspection when it has been penetrated or pierced
through sharp objects,which cause the battery internal short
circuit.Pierce the center position of the battery’s maximum surface
with high temperature resistant steel needle,whose diameter is
2-8mm, at thespeed of 10mm/s-40mm/s, and keep it for any time. The
battery is qualified by no explosion,no fire.
Specification and Parameter:
1.Power transmission mode: hydraulic pressure
A.the single battery is squeezed between the two parallel planes
B.the extrusion pressure of the plane is hydraulic pressure
transmission
C.After the battery is firmly clamped, start to squeeze,don’t
release until the pressure between two planes climb to 13kN.
Direction of squeezing:
For cylindrical cells, the long axis of the extruded cell should be
parallel to the extrusion plane of the extrusion device,
For the rectangular battery, the squeezing pressure should be
applied to the axial whose direction is perpendicular to one of the
two axes of the battery.Squeeze the other axial next time.
For the button battery, squeeze the plane. Each test battery is
only pressed once.
Parameter:
1,Door structure:The door of the box is provided with a
double-layer visible explosion-proof glass, and the back of the box
is provided with a pressure relief device and an exhaust tube,
which is convenient for external connection of the laboratory large
exhaust fan.
2,Observation window:The front of the door is opened with toughened
glass window, the size is 300*300mm.
3,Delay function:0~999min could be set arbitrarily.
4,Material of the explosion-proof box:
Outer container :cold-roll steel sheet with stoving varnish
Inner container: SUS304 stainless steel
5,Weight: about 220kg
6,Power supply:380V, 50HZ
7,Machine size: 800×630×1780mm(L*W*H)
