Full Synthetic Metal Cutting Fluid For Ferrous Metal Grinding And
Cutting
Metal Cutting Fluid Introduction
This product is a fully synthetic cutting fluid,widely used in
ferrous metal grinding and cutting
Metal Cutting Fluid features:
1, This product is a transparent liquid, composed of various kinds
of synthetic anti-rust agent, lubricant, additives.
2, Good lubrication, cooling, cleaning and anti-rust performance
3, Non-toxic, no smell, does not stimulate the skin,long-term use
4, Excellent rust prevention, to provide online protection for
machine tools and machining parts, long-term use, no corrosion to
paint of machine tool,will not produce discoloration phenomenon
5, Compared to emulsion liquid,cooling performance
significantly,good stability,long service life
6, Suitable for all kinds of grinding machine, coarse grinding,
cutting roughing and semi-finishing
7, Life cycle: 3 ~ 6 months
Metal Cutting Fluid Technical parameters
Item
| Quality index | Test method |
Original solution appearance,15~35℃
| Yellowish-green liquid | GB/T6144 5.2 |
Diluent(5%) | Defoaming ability mL/10min
| ≤2 | GB/T6144 5.6 |
pH
| 9.0～10.0 | GB/T6144 5.5 |
Corrosion test,full immersion,55±2℃ | First grade grey casting iron
| 24 | GB/T6144 5.8 |
T3 Red copper
| 24 |
H62 Brass
| 24 |
| Anti-rust test | First grade grey casting iron 35±2℃
| single | 24 | GB/T6144 5.9 |
Attention:
1, Machine tool should be complete filter, slag system, timely
removal of scrap metal, oil slick and other impurities, if not many
days to start the machine tool,if machine downtime for a long
time,should air circulation and oxygen filling tank on a regular
basis.
2, Central fluid feeding and central cooling system,should be
detailed operational procedures,that person is responsible for
operation.maintenance and management.
3, Mixed with other brand cutting fluid is prohibited
4, This product should be stored in a dry, cool and ventilated
inside storeroom, leakage should be avoided in the sun, rain, 5 ~
35 ℃ storage temperature.If improper storage cause the product
status changes, restore specified storage temperature after mixing,
and then dilute liquid, does not affect the processing performance,
can be used normally.
