BPA free Silicone Rubber Seal Ring For Pressure Cooker 6Qt Quad
ring seals
The specifications of the standard material
| Silicone Rubber For Food Use |
| Type | Appearance | Density (g/cm3) | Hardness (Shore A Point) | Tensile Strength (MPa) | Elongation at Breakage (%≥) | Tension Set)%≤) | Tear Strength (kN/m≥) |
| NE-631 | milky-white, translucent, no obvious extraneous matter | 1.08±0.05 | 30±2 | 5.5 | 500 | 5 | 14 |
| NE-641 | 1.13±0.05 | 40±2 | 6.5 | 400 | 5 | 16* |
| NE-651 | 1.15±0.05 | 50±2 | 8.0 | 320 | 6 | 20 |
| NE-661 | 1.19±0.05 | 60±2 | 8.0 | 300 | 6 | 20 |
| NE-671 | 1.22±0.05 | 70±2 | 7.5 | 220 | 5 | 18 |
| NE-681 | 1.25±0.05 | 80±2 | 7.0 | 180 | 5 | 18 |
| General Silicone Rubber for Molding |
| Type | Appearance | Density (g/cm3) | Hardness (Shore A Point) | Tensile Strength (MPa) | Elongation at Breakage (%≥) | Tension Set)%≤) | Tear Strength (kN/m≥) |
| NE-5130 | milky-white, translucent, no obvious extraneous matter | 1.09±0.05 | 30±2 | 5.0 | 440 | 8 | 15 |
| NE-5140 | 1.13±0.05 | 40±2 | 6.0 | 380 | 9 | 16* |
| NE-5150 | 1.15±0.05 | 50±2 | 7.0 | 320 | 10 | 18 |
| NE-5160 | 1.18±0.05 | 60±2 | 7.0 | 280 | 10 | 18 |
| NE-5170 | 1.21±0.05 | 70±2 | 6.5 | 200 | 9 | 16 |
| NE-5180 | 1.25±0.05 | 80±2 | 6.0 | 150 | 8 | 15 |
Production Feature
Silicone sealing rings can be divided into O-shaped silicone rings, cloth-patterned
silicone rings, V-shaped silicone rings, square silicone rings,
special-shaped silicone rings, etc. It's main function is
waterproof sealing and preservation, not only suitable for
household appliances such as electric water heaters, electric
irons, microwave ovens, etc., but also for various products that
come into contact with the human body, such as kettles, water
dispensers, lunch boxes, rice cookers, etc.
| Industry | Home Appliance,Electronics, Automotive, Consumer Goods, Aerospace and Defense,
Medical and health |
| Application | Rice Cooker, Induction Cooker, Pressure Cooker, Water Heater,
Vacuum Cleaner, Juicer, Lid Gasket, Kettle, Thermos Bottle, Thermos
Cup, Irons, Microwaves, Water dispensers, etc. |
| Advantage | - Excellent sealing performance,
- Waterproof,
- Leak proof,
- Good preservation effect,
- Completely non-toxic and odorless,
- Can be heated at high temperature without deformation and
generating harmful substances,
- Good tensile resistance, specially inspected and tested,
- Long term use without fading,
- Corona resistance,
- Arc resistance,
- High and low temperature resistance,
- Good aging resistance,
- High temperature resistance.
|
| Disadvantage | - Poor mechanical properties in terms of tensile strength and tear
strength. Usually, only static sealing is used.
- Silicone rubber has excellent acid and alkali resistance, but has
little resistance to alkane and aromatic oils. So it is not
suitable to use in environments with work pressure exceeding 50
pounds.
- relatively high manufacturing cost.
|
Order Processing
1. First, send the Inquiry with 3D drawing or sample to us, and
tell us the hardness and Tensile strength required, as more detaill
as better.
2. We will analysis the inquiry, and offer the quotation.
3. Buyers accept the quotation, confirm the trial order of
sampling, and make payment.
4. We will do sampleing and test, and send the sample or test
report to customer.
5. Sample confirmed, buyers place the bulk order.
6. We send the official PI for confirmation.
7. Buyers make the payment, and send the payment proof to us.
8. After the payment received, we will arrange the production.
9. We will notice the buyers when products is about to ready, and
book the inspection time with customers, or we show pictures for
confirmation.
10. As soon as the inspection passed, we will arrange delivery
according to the items we both agreed with the buyers.easy FYI
Inquiry (3D drawing or sample) ► Analysis & Quotation ► Trial Order & Payment ► Sampling & Test ►Sample Confirmation ► Bulk Order ► PI Confirmation ► Payment ► Production ► Inspection ► Delivery
Production Processing
1. If we have stock of material, we would start production soon,
say 5days. While if material out of stock, we might take about
25days more to resere the material.
2. Make Modeling according to the project, and match the colors as
per the confirmed order.
3. Mix the silicone rubber,
4. Shapping and Vulcanization.
5. The quality control team(QC) test the hardness and tensile
strength, they will give inspection along the whole production
line.
6. When the products ready, the workers will do triming.
7. We will print the customed logo if required.
8. QC and clean before packing.
9. Packing, Usually, PE inside , Carton Outside, Carons on pallets
if needed.
10. Products be transfered to the warehouse.
Material ► Color Matching ► Mixing ► Shapping & Vulcanization ►
QC ► Triming ► Logo Customize ► QC & Packing ► Warehousing
About Lan Anh Silicone
Lan Anh Silicone offers engineering services from initial part analysis to final
delivery. With an onsite tool shop, we can provide prototypes
quickly and economically. From your drawing, 3D model or sample
parts, our engineers can review the manufacturability of the part
and recommend changes that will reduce costs without compromising
performance. Our research and development (R&D) laboratory can
recommend materials suited for your application and offer testing
methods and services you may need to prove performance
characteristics.
Our Mission: To be a contributor to the environmental movement and the
improvement of living standards.
Our Vision: To be the pioneer of silicone products in the Asia-Pacific
region.
Our core values: provide employees with the most comfortable working environment,
fulfill corporate responsibilities, meet customer needs and build a
high-quality, professional team.
Our business philosophy: sincerity and pragmatism, gratitude and return, equality and
mutual benefit.
Certificates
