UHPC Special Synthetic Fiber With Diameter Of 0.2mm For UHPC Carved
Artwork
UHPC Special Synthetic Fibre
Product Description:
UHPC special synthetic fiber uses hydrophilic modification
technology for its surface treatment.
It has excellent dispersibility in UHPC, and has good bonding
performance with cement matrix materials, which can effectively
reduce and inhibit UHPC plastic shrinkage, drying shrinkage,
Micro-cracks caused by temperature changes and other factors
significantly improve crack resistance, toughening , impact
resistance, fire and explosion resistance of UHPC.
Applications:
- Building decoration exterior wall
- UHPC carved artwork
- Cement Flower pot products
- Municipal road bricks etc.
Benefits:
- No rusty
- Excellent dispersity
- Self compact
- Light and artistic
- Colourfull
Technical Information:
| Fibre Dimension | D:0.2mm; L:6/12mm |
| Minimum Tensile Strength | >950MPa |
| Modulus | >12GPa |
| Elongation at break | ≤30% |
| Density | 1.4g/cm3 |
| Acid &Alkali Resistance | Excellent |
| Moisture Content | ≤0.1% |
| Appearance | Transparent monofilament |
Guidelines for use:
Dosage: the usual dosing amount is 5.0-50.0kg /m3( the
corresponding volume dosing amount is 0.4-4.0%). Length: The length
of UHPC should be 6-12mm. According to different thicknedd of
components.
Stirring: After mixing the UHPC powder and water to make the slurry
evenly, add the fibers, and then stir for 2 to 4 minutes, subject
to the uniform dispersion of the fibers.
Curing: The construction and curing process of UHPC after adding
fiber is exactly the same as the system without fiber
Packing:
10 or 20kg/big bag, 700kg/pallet , 7000kg /1*20 ‘container ,
14000kg /1* 40 ‘container
