0.02mm 2UEW155 Insulation Enamelled Copper Wire Self Bonding Magnet Wire For Transformers / Lgnition Coils

0.02mm 2UEW155 Insulation Enamelled Copper Wire Self Bonding Magnet Wire For Transformers / Lgnition Coils

Magnet wire or enameled wire is a copper or aluminium wire coated with a very thin layer of insulation. It is used in the construction of transformers, inductors, motors, speakers, hard disk head actuators, electromagnets, and other applications that require tight coils of insulated wire.The wire itself is most often fully annealed, electrolytically refined copper. Aluminium magnet wire is sometimes used for large transformers and motors. The insulation is typically made of tough polymer film materials rather than enamel, as the name might suggest.

FEATURES

• With good solderability, reduces coil production costs due to elimination of mechanical or chemical stripping.

• Superior ''Q'' characteristic at high frequencies.

• Excellent film adhension and flexibility.

• Extremely resistant to a variety of solvents including most varnishes and hardener catalysts.

Characteristics	Technical requests	Test Results
		Sample 1	Sample 2
Surface	Good	OK	OK
Bare Wire Diameter	0.020±0.001	0.02	0.02
Overall Diameter	0.022-0.024	0.023	0.023
Conductor Resistance	≤60.810Ω/m	56.812	56.403
Elongation	≥8%	10%	10%
Breakdown Voltage	≥130V	212	247
Pinhole Test	≤ 8 holes/5m	1	0
Test Items	Technical Requests		Results
Adhesive	Coating layer is good		OK
Cut-through	200℃ 2mins no breakdown		OK
Heat Shock	180±5℃/30min no crack		OK
Solder Ability	390± 5℃ 2 Sec Smooth		OK
Solvent Resistance	No blister, no expansion, no shed		OK

RUIYUAN was established in 2002, located in Tianjin City,the second largest port city in China.We have been focusing on different kinds of high quality wires: enameled round copper wire, rectangular enameled copper triple insulated wire, silk covered Litz wire, bonding wire and special enameled wire for 23 years.Ruiyuan is one of the pioneers in producing micro thin enameled wires below 0.03mm in China. Our R & D team has 20 years of market experience. In 2019, our finest diameter is 0.011mm, and mass production has been achieved. All of our products are UL, RoHS certified, in line with industry standards IEC60317, JIS C 3202, NEMA, NW82.