Used 3000/530mm 2 Color Printer Slotter Die Cutting Machine Of Low
Price
Main characteristics of equipment operation:
Paper feeding department:
PLC circuit control and man-machine interface are adopted for
frequency conversion adjustment of the main motor of paper feeding
department.
1) The kick board will automatically return to zero whenever it
stops.
2) The clutch of the front control panel, side baffle and rear
baffle unit is automatically adjusted by computer.
3) Paper feeding and air suction auxiliary system, the air volume
can be adjusted arbitrarily.
4) Frequency conversion adjustment of main engine motor and dust
removal device with paper feeding brush, which is easy to operate
and accurate in paper feeding.
Printing department:
1)
The printing wheel of the printing department is adjusted by 360
degrees correspondingly, and is electrically adjusted in reverse,
which can stop operation during operation.
2)
The maximum lateral displacement of printing wheel can reach 12.5mm
..
3)
Automatic zeroing device, no need to adjust the phase when the
units are separated and merged.
4)
Each group of printing department is equipped with foot switch,
rotating printing wheel, assisting Su to hang up the plate and
clean the plate.
5)
The inking wheel is a ceramic net roller, which is powered by air
cylinder and automatically lifts off the printing plate when it
stops.
6)
Pneumatic diaphragm pump for ink supply, closed ink recovery tank
device, easy to clean, leak-proof and splash-proof.
7)
Equipped with ink supply detection system, it can automatically
alarm at any time, and each side plate of the printing department
engages and disengages electromagnetic brake.
