Kitchenware Built In Gas Stove Glass Panel Kitchen Appliance Gas
Hob Electric Stove Gas Cooke
TECHNICAL DATA OF GAS STOVE
| Model | RZ-B07 |
| Panel | 8mm Thickness Tempered Glass |
| Burner | Chinese Sabaf/Italy Original Sabaft/ Copper |
| Pan Support | Pan Support |
| Ignition type | AC/Battery Ignition |
| Back Shell | 0.6MM Thickness Galvanized Sheet |
| Safety Device | Safety Device |
| Product Size(MM) | 590×510x115 |
| Packing Size (MM) | 640x550x145 |
GAS STOVE INSTRUCTIONS
1. Safe and Reliable
With 21 kinds of safe protection•Low failure rate
2. Comfort
Ultra-quiet operation•more comfortable
3. Convenience
Touch control•more precise
4. Environmental protection
Eenrgy saving and environmental protection•Follow the trend
5. After sale
7*24 after-sales service,worry free
PRODUCT DISPLAY
The reasons for flameout after the gas stove is burned are as
follows: 1,Not enough gas.Specific solution: pay the gas fee
immediately (wait about half an hour), or supplement the gas..
2, flameout protection induction needle failure; Specific solution:
In this case, it must be repaired. Please call the service phone of
your gas cooker. If it is within the 1-year warranty period, it
should be free.
3. The damper is too large or too small; Specific solution: adjust
the damper. First of all, we need to adjust the small damper to
increase the concentration of gas. Then, adjust the damper to the
blue flame after ignition, but the bottom of the flame can not
leave the stoma, otherwise there will be extinguished.
4. The fire cover is not placed in the correct position; Solution:
Reinstall the fire cover and pay attention to the precautions
mentioned above.
5. The distance between the metal rod at the top of the spark
porcelain column and the stove is abnormal. Of course, this
situation is relatively few, that is, the distance between the
metal rod at the top of the spark porcelain column and the stove,
need to be just right. If the distance is large, there will be no
spark phenomenon; If the distance is close, there will be abnormal
spark, the general distance is about 1cm is the best.
The gas stove can not fire how to do
1. When the gas stove fails to fire, you need to find the problem
first. First check whether there is gas, if not, it needs to be
added in time.
2. If it is a pulse type, it may be that the battery has no power.
You only need to open the tank box at the bottom of the gas stove
and replace the new battery.
3, if the above are dealt with, but still can not fire, there may
be poor line contact. The gas range can be lifted, rust removed,
and the wiring reconnected. And the ignition needle should be
aligned with the air outlet of the fire cover, the internal rusty
place, dredge with a toothpick.
4, if it still can't be solved, there may be a problem with the
ignition needle, need to replace a new ignition needle, and try
again.
ABOUT US
Qingdao Hiounce hvac equipment co., Ltd., located in "brand, the
beautiful coastal city - qingdao, China, was founded in the 1950s
of the qingdao municipal restructuring state-owned enterprises -
qingdao boiler factory. it is a company dedicated to research and
development, production of high-grade hanging wall hanging furnace,
the electric heating furnace, biomass cainuanlu, kitchen burning
gas, discharge of oil absorption and the module of boiler fuel gas
high-tech enterprises.
Qingdao Hiounce hvac equipment co., Ltd.have more than 100
employees.Company headquarters has total handling, personnel
department, finance department, marketing department, the ministry
of commerce, office (provincial), purchasing, and import and export
department, technology department, engineering department,
after-sales service department, and other functions of the eleven
departments, through the perfect sales and service network,
security, stability, energy saving, environmental protection
products supply users.
