Brembo V6 6 Pot Brake Kit 355*34mm Disc For Mercedes Benz E400l
Configuration list
Caliper: Brembo V6 brake caliper * 1 pair
Brake disc: 355 * 34mm hole wire disc * 1 pair
Brake pad: HP1000 Street brake pad * 4 pads
Brake Hose: dicase upgrade * 1 pair
Disc Bell : blade * 1 pair
Caliper bracket: special car customized * 1 pair
The car needs to run fast and brake well. Many car owners are
dissatisfied with the original brakes and want to upgrade the
brakes. So what should we pay attention to.
General brake upgrade package includes caliper, brake disc, brake
pad, disc bell and caliper bracket
calipers
Generally, the calipers of the original factory are mostly one-way
single piston, while the calipers of the refitted brand are
generally two-way multi piston, generally with 4 pistons, 6 pistons
and 8 pistons. Two way multi piston can provide greater and more
uniform braking force than the original caliper.
brake disc
The modified brand brake discs are generally larger than the
original brake discs. Most of the brake discs are split type with
ventilation holes. The larger brake disc provides a larger braking
area, the split ventilation disc is stressed evenly, and the heat
dissipation of the brake disc is improved. The design of scribing
type and punching type can quickly remove the powder falling from
the brake pad along the hole during braking, reduce the slip
phenomenon caused by the powder and improve the friction
Brake pads
Due to the requirements of cost, durability, cleanliness (brake
powder) and low-temperature efficiency, the friction coefficient
(MU) of the original brake skin is generally not very high (about
below 0.4), and can not withstand the temperature of more than 300
℃. Therefore, the efficiency will decline after continuous use for
many times.
It is recommended that ordinary fans can choose "Sports" brake
shoes with working temperature of about 0 ℃ to 500 ℃ and mu value
of more than 0.4, which can meet the needs of most situations (IDI,
PFC, FERODO and project Mu have this type of choice). (it can be
seen from the bottom of the box that this brake skin is suitable
for ap5200 large four piston suit, and the brand of brake skin is
MinTex)
Brake steel throat
For drivers who pay attention to the feeling of braking feet,
replacing the brake oil pipe is also a cost-effective upgrading
project. Because the outer layer of the original brake oil pipe is
generally made of rubber materials, the rubber oil pipe will expand
due to the high pressure of the brake oil during strong braking,
which slows down the flow speed of the brake oil and slows the
braking response when stepping on the brake pedal, The foot feel is
not realistic enough. The upgraded brake oil pipe is wrapped with a
layer of strong metal wire on the outside of the rubber pipe to
reduce the expansion of the oil pipe, so it is also called brake
steel throat. After replacing the brake steel throat, the feedback
force of the brake pedal will be significantly enhanced, giving
people a solid feeling of jacking feet.
Item | Brembo V6 6 Pot Brake Kit |
| Caliper Pots Number | 6 Pot |
Application | Car brake |
Caliper technology | Forged |
| Disc rotor size | 355*34mm |
| Brake pads size | 58mm |
| Center cap bracket | custom for Mercedes Benz E400l |
| Brake line | 65cm |
| Bracket bolts size | 70mm/M12 |
2014 Mercedes Benz e400l 3.0L twin turbocharged original 18 inch
wheel hub is upgraded. 6 pot brake kit Brembo V6 imported from
Italy is combined with 355 * 34 high carbon disc high-performance
brake package. The wheel hub of the original car is installed
without damage, which should be fast and braking!
