1000LPH Brackish Water RO System , Drinking Water Treatment Plant

Process

Raw water → raw water tank(user supply)→ raw water pump→quartz sand filter →activated carbon filter→anti-scale dosing system(optional)→security filter→high pressure pump→ro system→pure water tank(user supply)+UV sterilizer(ozone generator) + water supply point

Main parts function

1. Raw water pump

-- provide the pressure to sand/carbon filter

2. Sand filter

-- get rid of turbidity, suspended matter, organic matter, colloid and so on

3. Carbon filter

--Remove color, free chloride, organic matter, harmful matter and so on

4. Anti-scale dosing

--add antiscalant(buyer supply) , absorb Ca2+, Mg2+(main elements for composing scale), reduce hardness of raw water.

5. Micron filter

--prevent any deposition of large particles, some bacteria, and viruses into the RO membrane, The accuracy is 5um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.

6. High pressure pump

-- Provide the high pressure to RO membrane, at least 2.0 MPA

7. RO system

--RO system is the heart part of pure water plant. The RO systems are capable of removing over 99% of ions, bacteria, particles and 98% of organics and silica.

Features

• Permeate water recirculation with UV disinfection.

• Skid Mouted type & container type can be optional

• Interface HMI human machine,Runs automatically and controlled by PLC

• Protection system, plant turns off if it encounters a fault

• Energy saving and low noise, no need to heat

• Stable running, high desalination and recovery rate with no pollution

• Compact structure and saves installation place

• Longer service life, lower matainece matainence cost and power consumption.

• User-friendly design, easy to operate, wash RO membrane when turn on and off

• Dependable performance and long life time

• Highly efficient and low carbon emissions