COVID-19 Saliva Collection Kit –Saliva with Funnel and Transport
Media manufactured in ISO certified facility
【FEATURES】
1. The kit includes 1 funnel and 2 collector tubes(3ml and 10ml
both are available).
2. Use and application scope: Collection of human saliva specimen.
3. With medium or without the medium.
4. Excellent sealing design ensure leakproof.
5. Individual Packing or bulk packing
【PACKING】
30pc/box, 10box/CTN
Kit package: one collection funnel with tube+10ml tube+3ml medium
+biohazard bag.
【INTENDED USE】
It is used to collect and store saliva samples from the mouth. The
samples are
extracted for clinical in vitro diagnosis.
【MAIN COMPONMENTS】
| Number | Composition | 30 Kits/box |
| 1 | Collection Funnel (with a collection tube) | 30 pcs/box |
| 2 | Saliva Preservation Tube(with 3ml saliva preservation solution ) | 30 pcs/box |
| 3 | Biohazard Bag | 30 pcs/box |
| 4 | Instructions | 1 pcs |
【How to Collect Your Own COVID-19 Saliva Specimen
(with Funnel and Transport Media)】
This step-by-step guide shows you how to collect your own saliva
sample with a funnel and
transport media.
Duration: 3 min
Instructions
Do NOT eat, drink, chew gum, smoke, or vape for at least 30 minutes
before collecting saliva.
Wash hands and make sure you have everything you need before you
begin. A saliva test kit
consists of an empty tube with blue liquid in the cap, a funnel, a
clear bag to place the sample,
a COVID-19 test requisition form, and a label for the tube with
your information. Be sure to
leave the small absorbent paper in the provided biohazard bag.
Label the tube with the date of collection, full name and date of
birth or Health Card Number.
Failure to provide this information may result in rejection or
testing delay.
Complete all required fields of the COVID-19 test requisition form.
Peel back the paper on the test kit and remove the cap containing
the blue liquid and the
specimen tube with attached funnel. Stick the completed label on
the tube. Place the cap upside
down in a clean, secure spot, it will be used to seal the sample.
To promote saliva production, rub the inside of your cheek with
your tongue and allow saliva to
pool in your mouth, then begin carefully spitting into the funnel
allowing saliva to run into the
tube until it reached the fill line (not including bubbles).
Once you have collected enough saliva, twist off the funnel top and
place in the garbage.
Immediately put the cap containing the blue liquid back on the
tube, twisting tightly until you
hear a click and the blue liquid mixes into the tube.
Shake tube for five seconds to mix saliva and liquid and do not
reopen the tube or remove any liquid.
Place the tube in the provided biohazard bag and place the fully
completed test requisition form
into the outer pocket of the bag. Close the bag.
Wash your hands and check with your school for where to drop off
the test. The specimen should
be kept at room temperature and dropped off within two hours of
collection.
How to Collect a Saliva Sample for a COVID 19 PCR Test
This step-by-step guide shows you how to use a saliva test kit to
collect a saliva specimen for
a COVID-19 test.
Duration: 3 min
Instructions
Before collecting saliva:
Please read all of these instructions before beginning
Drink a cup of water 60 minutes before collecting saliva to ensure
adequate hydration for
saliva flow.
Do NOT eat, drink, chew gum, smoke, or vape for at least 30 minutes
before collecting saliva
Wash hands with soap and water or hand sanitizer
For specimen collection center personnel:
While wearing appropriate personal protective equipment (PPE), open
the sealed bag and
remove the specimen container and funnel from the package.
Label the specimen container with the patient’s full name, date of
collection, and one other
unique identifier such as date of birth or Health Card Number.
Failure to provide this information
may result in rejection or testing delay.
【STORAGE CONDITIONS】
Store at temperature 5 - 25 ℃.
【SAPMLE REQUIREMENTS】
Applicable sample types: Saliva.
Storage and transportation of samples: After the sample is
collected, it should be transported to the corresponding laboratory
for testing within 48 hours, and the storage temperature is 2-8℃.
If it cannot be transported to the laboratory within 48 hours, it
should be stored at -20 ℃ or below and sent to the corresponding
laboratory within one week. The sample should avoid repeated
freezing and thawing.
【INSTRUCTIONS】
| 1 | Clean your mouth 30 minutes before collecting the saliva sample,
rotate the tongue in the mouth to enrich saliva. |
| 2 | Deliver saliva into the collection funnel, until the 2 mL line is
as instructed on the tube. |
| 3 | Hold the saliva collection tube in an upright position, and use the
other hand to unscrew the saliva preservation solution tube cap. |
| 4 | Keep the collection funnel upright, and pour the saliva
preservation solution slowly into the collection tube. |
| 5 | Keep the collection tube upright, remove the collection funnel. |
| 6 | Screwcap onto the collection tube, and invert gently 5 times to mix
the saliva and saliva preservation solution thoroughly. Finally,
put it in a biohazard bag for easy transportation. |
【PRECAUTIONS】
- Samplers should be sent for testing as soon as possible after
sampling and immediately transported within 48 hours at 2-8 ℃.
Long-term storage should be placed in low-temperature conditions
below -20℃, -70℃ or store at freezing level -196℃.
- Sampling should be carried out in strict accordance with the
sampling procedure so that the sampling location is accurate and
the sampling strength is uniform and suitable. Otherwise, it will
affect the quality of the sample.
- Do not use expired products and products with damaged packaging.
【EXPIRATION DATE】
12 months
【INDEX OF SYMBOL】
【EXPORTER】
Magnus International Limited
F12, New City International Mansion A, 234 Huapao Ave.
Liuyang, Hunan Province 410300 China
Contact: Goodwellmedical@gmail.com
【AUTHORIZED REPRESENTATIVE】
Lotus NL B.V.
Koningin Julianaplein 10, 1e Verd, 2595AA, The Hague, Netherlands.
【FACTORY VIEW】
【FACTORY WORKSHOP】
【PRODUCTION】
【PRODUCT AND STANDARDS】
【CERTIFICATIONS】
【FAQ】
1. Q: How about your healthcare and medical product quality?
A: Quality is our top priority. We have a professional quality
control team to ensure the
quality with a high standard and regulated with the pro
certifications. The QC team is
responsible for quality checking in each process and inspects every
batch of our production
and ships them only after QC approval.
2. Q: What is your order MOQ?
A: Please contact customer service, and the price is negotiable for
a large quantity.
3. Q: How about your product packing for shipment or mailing?
A: We prepared a well neutral package for our products. We could
also make OEM packages,
OEM/ODM Custom Package/Multi-packing package/Cartons with well
protective wrapping.
4. Q: What level of your product price?
A: We are the factory and direct manufacturer and offer competitive
prices. We also offer
volume pricing with more benefits depending on your order quantity
level. Please let us know
your ordering volume while you make the inquiry to us to help you
obtain better benefits.
5. Q: What're the price terms?
A: The price is based on the FOB of Hunan, China with an exchange
rate of RMB6.40 for
USD$1.00. If the exchange rate floating sharply lower than 6.3 or higher than
6.5, we should
adjust the price with the real-time exchange rate.
6. Q: What're the payment terms?
A: We accept T/T wire transferring, PayPal, Western Union, etc. 50%
down payment after
signing the contract and rest 50% before shipping confirmation.
7. Q: How could I get some samples?
A: We are able to deduct your samples expense once your orders are
confirmed with us.
The shipping fee will be calculated with the sample volume that you
demand.
8. Q: Could you accept OEM orders?
A: Yes, we could. We have professional designers who can design the
logo or artwork and offer
best solution & styles for your OEM product choices.
9. Q: How long will the shipping or express take?
A: (1) For the international express such as DHL, UPS, FedEx, TNT,
or EMS, etc., it usually
takes 5-7 working days to your location or destination.
(2) If shipping with containers, they will take about 30-60 days to
process depending on
the various ports or door locations.
(3) We will arrange the delivery or shipping of your products
within 1-3 days after full
payment has been confirmed. We may not ship your products out until your
payments arrive
to our bank account successfully.
10. Q: How do you deliver the goods to us?
A: If the order of small volume package, we could deliver by
courier such as DHL, UPS, FedEx,
TNT, EMS. For the large volume order, we could ship with bulk cargo
containers by sea.
We will provide you with cost-saving recommendations for your
product shipping.
11. Q: What is the warranty time.
A: One year for each product.
【SHIPPING】
We are the trusted healthcare and medical supplies from China.
Be free to contact us at any time!
You are very welcome to email us today at:
Goodwellmedical@gmail.com for the inquiry!
We are excited to build a reliable and long-term business with you
at our best!
