G60 Dimple Diamond hole Expanded Galvanized Stucco Lath 27*96inches
Product Description
This kind of expanded metal is widely used in plaster project.It
provides an excellent plaster base.
The permanent plate holds the plate approximately 1/4" away from
solid surfaces to aid the stucco to the plate.So the pleastering is
very solid and flat and can also keep away from cracking.
A Self-Furred Metal Lath is ideal for interior and exterior use
over sheathing, masonry and other solid surfaces,
The dimple self-furring plaster base is manufactured with evenly
spaced indentations that hold the metal lath ¼” away from the
surface to be plastered. Self-furring metal lath is available with
or without a Grade-D asphalt paper-backing, breather sheet.
27"*96" G60 standard diamond galvanized flat rib expanded metal
lath interior exterior stucco is manufactured by slitting and
stretching galvanized steel to form small opening to allow the
keying of plaster.
Metal lath provides a lightweight and easily attachable base for
plaster application.Made from expanded steel,the lath generally is
applied flat across the stud plane and attached with staples,nails
or screws.
The opening in the lath enable plaster to key around the metal to
assure a secure bond and a flat,smooth surface of the plaster
application.
Product Specification
1.75lbs 2.5lbs 3.4lbs expanded stucco galvanized mesh |
Material | Galvanized sheet G30 G60 G90,Stainless steel |
Type | Flat,self furring,dimples,"V" ribs |
Size | 27"*96" |
Weight:sq/yd | 1.75lbs 2.0lbs 2.5lbs 3.4lbs |
Package | 10 sheets/bundle,500 sheets/pallets |
Other products | Angle beads,rib lath,coil mesh, diamond metal lath,expanded metal
mesh,plaster bead, control joint beads |
Quantity for one container | 12000pcs or 10000pcs |
Product Advantage
Metal lath diamond stucco netting mesh is ideal as a plaster base
and reinforcement for all types of construction in walls,ceilings
and fireproofing of steel beam and columns.
Easy to cut and form to ornamental plaster work.The expanded metal
lath is available in 1.75lbs,2.5lbs and 3.4lbs per square yards.All
three of these are available in either flat,self furred,dimped of
grooved.
Material | Weight | Width | Length | Packing |
G60 G90galvanized sheet | 1.75lbs | 27" | 96" | 10pcs per bundle,50bundle per pallet |
2.5lbs | 27" | 96' | 10pcs per bundle,50bundle per pallet |
3.4lbs | 27" | 96" | 10pcs per bundle,50bundle per pallets |
Product Application:
Self-furred Stucco Lath is secured to masonry surfaces with
hardened concrete nails and power driven fasteners at the furring
dimples. Paper backed lath is often used in this type of
application as a bond breaker.
The diamond metal lath is used in wall, reinforcing, construction
crack, plaster network industry, civil construction, irrigation,
municipal, transportation, road, and other projects,mainly for
residential wall plater, repairing and reinforcing the warehouse,
Rib lath, stiffened by longitudinals ribs for use on ceilings and
partitions as well as walls.
