Xenon Light Fastness Tester Weather Control Chamber ASTM G154
Description & Application
Xenon Light Fastness Tester Weather Control Chamber ASTM G154
reproduces weathering damage by sunlight, temperature, humidity and
water spray. Xenon weathering test chambers are utilized in
textiles, dyes, leather, plastics, paints, coatings, automotive
interior parts, electrotechnical products, color building
materials. To perform weathering test, color fastness tests, aging
test, hardening test, softening test, crack
Main Technical Parameter
| Model | XL-500 |
| Internal dimensions D*W*H | 500*600*700 mm |
| Overall dimensions D*W*H | 1200*1150*1700 mm |
| Chamber Type | Flat shelf |
| Irradiation Source | 1 piece of 1500w air-cooled xenon lamp with inner quartz and outer
borosilicate filter |
| Irradiance Range | 100~1200 W/㎡ |
| Bandwidth Measurement | 280nm~800nm |
| Chamber Temperature Range | Ambient ~100℃±2°C |
| Black Panel Temperature | BPT 35 ~85℃±2°C |
| Relative Humidity Range | 50~98% R.H±5% RH |
| Water Spray cycle | 1～9999H59M, adjustable |
| Controller | programmable color display touch screen controller, PC Link, R-232
interface |
| Radiometer | Tolerance: ±5% |
| Heating system | Nichrome heater |
| Cooling system | Mechanical compression refrigeration system |
| Refrigerating unit | French TECUMSEH compressor |
| Humidification system | External isolation, stainless steel surface evaporation humidifier |
| Air circulation | Centrifugal wind fan |
| Water supply system | Automatic water supply; Water purification system |
| Safety device | Humidifier dry-combustion protection; over-temperature protection; over-current protection; Refrigerant high-pressure protection;
Water shortage protection, Earth leakage protection; |
| Interior material | SUS304 stainless steel |
| Exterior material | Steel Plate with protective coating |
| Thermal insulation | Polyurethane foam |
| Observation window | Interior lighting , double-layer thermo stability silicone rubber
sealing |
| Power Supply | AC380V 50HZ |
| Standard | ISO 105-B02/B04/B06, ISO4892-2, ISO11341. AATCC TM16, TM169, ASTM
G155-1/155-4, JIS L0843, SAEJ1960/1885, JASOM346, PV1303, IEC61215,
IEC62688 |
Key Features
- 4500 W water-cooled Xenon Lamp
- Programmable color display touch screen controller
- Ethernet & USB
- Measurement and control of Irradiance: 340nm, 420nm or 300-400 nm,
280-800nm
- Measurement and control of Black Panel Temperature( BPT)
- Measurement and control of Chamber Temperature
- Measurement and control of Chamber relative humidity
- Automatic water spraying system
- Build-in water reservoir and automatic water supply
- Large viewing window in door
- Safety protection system
Design and Construction
Test Area and Sampler Holder
Ozone test chamber is for testing of elastomers.
Test area is made of stainless-steel.
Equipped with dynamic sample holder.
(Static and dynamic holder as option)
Temperature Control
Mechanical compression refrigeration system
Refrigerating unit is French TECUMSEH compressor.
Environment friendly refrigerant
Temperature range: 0℃～100℃
Humidity Control
External isolation, stainless steel surface evaporation humidifier
Humidity range: 30% - 98％R.H
Ozone Generator
Ozone test chamber equipped with ozone generator to supply
ozone gas.
Automatic control and supply ozone gas.
Ozone concentration: 1～1000PPHM (Adjusted).
Control Operation
Programmable color display touch screen controller
Program: 100 groups in 999 sections; R-232 interface, PC Link
Measure, control and display Temperature, humidity and Ozone
concentration.
Clamps tensile stretch can be sent on controller.
Ozone Exhaust Device
After completed ozone testing, click “Exha” button on controller
to exhaust ozone from test area to this exhaust device.
This absorbs ozone, to make workplace clean and safe.
Safety Protection
Humidifier dry-combustion protection
Over-temperature protection,
Over-current protection
Refrigerant high-pressure protection switch
Earth leakage protection
Standard
ISO 105-B02/B04/B06
ISO4892-2
ISO11341
AATCC TM16, TM169
ASTM G155-1/155-4
JIS L0843
SAEJ1960/1885, JASOM346,
PV1303
IEC61215
IEC62688
Package and Shipping
Packed with export standard wooden case.
Strong packages can be used for sea, air, railway, truck transport
and multimodal transport.
Quick ship, some models are in stock, ship in 1-3 days.
Provide door to door service for customers.
Certification
LIB test chambers accept and approved by CE, CSA, RoHS, TUV, SGS
and ISO17025 calibration
Our Services
Pre-Sales Service
* Inquiry and consulting support.
* Offering quotation and specifications.
* Provide test solutions.
* Visiting our factory. |
After-Sales Service
* 3 Years Warranty, Lifelong Follow-up Services.
* Training how to install and operate the machine.
* Training how to maintain the machine.
* Response within 24 hours once got questions from customers.
* Send spare parts within 2 days after got notice.
* Engineers available to service machinery overseas to install and
commissioning. |
About LIB
Xi'an LIB environmental simulation industry is a manufacture and
exporter of climatic test chambers in China, and have over 8 years
overseas market in test chambers to more than 25 countries.
LIB adhered to "Quality", "Service", and "Trust".
LIB main products are
Temperature and humidity climatic test chamber
Thermal shock chamber
Salt spray test chamber & CCT
IP test chambers
Weathering test chambers
Ozone test chamber
Sulfur dioxide corrosion test chamber
Drying Oven
Walk-in chamber
LIB Industry undertakes standard and customized climatic chamber
projects, we involve with designing, manufacturing, installation,
commissioning, service, maintenance and calibration, pls contact
us, we will provide the best solution to you.
Other Products
Contact us now for a 3%-5% discount!
