KLD800 series 80G Radar Level Gauge Strong corrosion resistance
The high-frequency 80g radar level gauge has the advantages of low
maintenance, high performance, high precision, high reliability,
and long service life. Compared with contact instruments such as
capacitors and weights, it has incomparable advantages. The
transmission of microwave signals is not affected by the
atmosphere, so it can meet the requirements of harsh environments
such as volatile gas, high temperature, high pressure, steam,
vacuum and high dust in the process. This product is suitable for
harsh environments such as high temperature, high pressure, vacuum,
steam, high dust and volatile gas. Continuous measurement of
different material levels is possible.
The KLD-80G series radar level gauge is an 80G ultra-high
frequency, millimeter-wave radar with a measurement accuracy of up
to ±2mm and a minimum blind zone of 0.05m. Lens antenna design, smaller
beam angle, more suitable for complex working conditions such as
small-diameter tanks and stirring coils in the tank. With stronger
penetrability and multiple measurement modes, various antennas can
be selected according to different industries and mines to ensure
that the radar can also measure stably and accurately under complex
conditions such as high temperature, high pressure and high dust.
Feature
⚫ Millimeter wave radar, the measurement accuracy can reach up to
±2mm, and the
minimum measurement blind zone is 0.05m.
⚫ The smaller antenna size satisfies the measurement of more
working conditions.
⚫ A variety of lens antennas, smaller launch angles, more
concentrated energy, stronger
echo signals, and higher reliability than other radar products
under the same industrial
and mining conditions.
⚫ It has stronger penetration and can be used normally in the case
of adhesion and
condensation.
⚫ The dynamic signal range is larger, and the measurement of low
dielectric constant
media is more stable.
⚫ Multiple measurement modes, radar response in fast measurement
mode
Technical Specification and Model Selections
| Model | KLD805 |
| Medium | strong corrosive liquid, steam, foam,high temperature. and high
pressure |
| Measuring range | 0.1m~10/20/30/60/100m |
| Process connection | flange ≥ DN80 |
| Process temperature | -40～200℃ |
| Process pressure | -0.1～2.5MPa |
| Antenna size | 76mm lens antenna |
| Antenna material | PTFE |
| Accuracy | ±1mm |
| Protection class | IP67 |
| Center frequency | 80GHz |
| Launch angle | 3° |
| Power supply | Two-wire /DC24V / four-wire /DC12~24V / four-wire /AC220V |
| Casing | aluminum/plastic/stainless steel |
| Signal output | two-wire /4...20mA/HART protocol four-wire / 4...20mA/ RS485 Modbus |
Connection
KLD800 series product show
