1220x2440mm Durable Fiberglass Board 12mm Glass Fiber Gypsum Board
Product Description
Glass Fiber Reinforced Gypsum (GFRG) Panel is a building panel
product, made of calcined gypsum, plaster, reinforced with glass
fibers, for Mass-scale building construction, was originally
developed and used since 1990 in Australia. The panel, manufactured
to a thickness of 124mm under carefully controlled conditions to a
length of 12 m and height of 3m, contains cavities that may be
unfilled, partially filled or fully filled with reinforced concrete
as per structural requirement. Experimental studies and research in
Australia, China and India have shown that GFRG panels, suitably
filled with plain reinforced concrete possesses substantial
strength to act not only as load bearing elements but also as shear
wall, capable of resisting lateral loads due to earthquake and
wind. GFRG panel can also be used advantageously as in-fills
(nonload bearing) in combination with RCC framed columns and beams
(conventional framed construction of multi-storey building) without
any restriction on number of stories micro-beams and RCC screed
(acting on T-beam) can be used as floor/ roof slab.
Product Features
GFRG panel possesses high flexural strength, shearing strength,
compressive strength, and flexibility. It has a very high level of
resistance to fire, water, heat, corrosion, rot, and termites.
Concrete filled with vertical reinforcement rods improves it’s
vertical and lateral load capacities. GFRG made buildings are
resistant to fire, earthquakes, and cyclones.
Product Parameters
| Matrix | Glass Fiber Reinforced Gypsum (GFRG) Panel |
| Glass Fiber | 5-6% weight, Type E 38% by volume |
| Thickness | 3/16” Nominal |
| Flexural Strength | 10, 660 PSI |
| Modulus of Elasticity | 1.43 X 10^6 PSI |
| Ultimate Tensile Strength | 2, 250 PSI (ASTM D638) |
| Modulus of Elasticity | 3.87 X 10^6 PSI |
| Flammability (ASTM E84-81A): | Flame Spread Index -0 Smoke Developed Value -0 Fuel Contributed -0 |
| Impact Strength (ASTM D256) | 12.9 ft. lb/in |
| Thermal Conductivity (ASTM C518) | “C” of 1.56 BTU/hr. ft^2 0F |
| Barcol Hardness (ASTM D2583) | 64 |
| Rockwell Hardness (ASTM D785) | 98.8 ‘M’ Scale |
| Density | 106.4 lbs/ft. ^3 |
| Thermal Coefficient of Expansion (ASTM D696) | 5.4X10^6 in. /in/ /0f |
| Compressive Strength (ASTM C39/C109) | 7, 080 PSI |
| Water Resistance (ASTM C473) | 12.5% Weight Gain |
| Humidified Deflection (ASTM C473) | 1/8” |
| Toxicity NBS/U.S. Testing | Non-Toxic |
Product Appliction
1. Wall Panels: GFRG panels are used as interior wall panels in
commercial and residential buildings. They provide a smooth and
seamless surface that can be painted or textured.
2. Ceiling Panels: GFRG panels are used as ceiling tiles in
commercial buildings. They are lightweight, easy to install and can
be customized to fit any design.
3. Columns and Capitals: GFRG is used to create decorative columns
and capitals that mimic the look of traditional stone or plaster.
These elements add a touch of elegance to any building.
4. Moldings and Cornices: GFRG is used to create intricate moldings
and cornices that are often used in high-end residential and
commercial buildings.
5. Fire-Rated Walls: GFRG board is used in the construction of
fire-rated walls. It has a high resistance to fire and is able to
contain flames and smoke.
6. Partition Walls: GFRG panels are used as partition walls in
commercial buildings. They are easy to install and can be
customized to fit any space.
Packaging&Shipping
