The advantages of the light steel keel gypsum board ceiling system
are convenient installation, fast construction, beautiful
appearance, and good sound insulation effect, which are widely used
in various applications. At the same time, the system also requires
regular maintenance and inspection to ensure its safety and
reliability.
The Light Steel Keel Gypsum Board Ceiling System is a popular type
of suspended ceiling system used in both residential and commercial
construction. It is composed of a steel framework made from thin,
lightweight galvanized steel sections that are formed into
channels, studs, and tracks. These steel components are designed to
interlock, creating a sturdy framework that supports a layer of
gypsum board or plasterboard that forms the visible ceiling
surface.
| Accessories | Specification(mm) | Unit | Dosage |
| Height
(mm) | Width
(mm) | Thickness
(mm) | Length
(mm) |
| Main Channel | 27 | 60 | 1.2 | 3000 | M | 1m/Sqm |
| 27 | 60 | 1.1 | 3000 | M | 1m/Sqm |
| 27 | 60 | 1 | 3000 | M | 1m/Sqm |
| Vice Channel | 27 | 60 | 0.8 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.7 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.6 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.5 | 3000 | M | 3m/Sqm |
| Wall Angle | 20 | 27 | 0.5 | 3000 | PCS | 0.2pcs/Sqm |
| Sleeve Anchor | | | φ8 | | SET | 1set/Sqm |
| Thread Rod | | | φ6/8/10/12 | 3000 | M | 1m/Sqm |
| Nut | | | φ8 | | PCS | 3pcs/Sqm |
| Drywalll Screw | 3.5*50 | | | Box | 1 box/40Sqm |
| 3.5*35 | | | Box | 1 box/40Sqm |
| Hanger | / | PCS | 1 pcs/Sqm |
| Conneting Clip | / | PCS | 2 pcs/Sqm |
| Putty Powder | 20kgs/bag | BAG | 1bag/10Sqm |
| Joint Compound | 25kgs/bucket | Bucket | 0.2bucket/Sqm |
| Paper Joint Tape | 46*50000 | Roll | 1Roll/9Sqm |
| 46*75000 | Roll | 1Roll/13Sqm |
Main Runner: The main runner is the primary T-shaped component that runs along
the length of the ceiling. It is used to support the cross tees and
the ceiling tiles.
Cross Tee: The cross tee is a T-shaped component that connects to the main
runner to form a grid pattern. It is used to support the ceiling
tiles.
Wall Angle: The wall angle is an L-shaped component that is used to create a
perimeter around the ceiling. It is attached to the walls and
provides a surface for the ceiling tiles to rest on.
Hanger: The hanger is a metal wire that is used to suspend the main
runners from the ceiling or the roof structure. It is attached to
the main runner using a clip or a hook.
Clip: The clip is a metal component that is used to connect the main
runner to the hanger wire. It is inserted into the slot on the main
runner and attached to the hanger wire.
Hook: The hook is a metal component that is used to connect the main
runner to the hanger wire. It is inserted into the hole on the main
runner and attached to the hanger wire.
The German type ceiling system is a type of suspended ceiling
system that is commonly used in commercial and residential
buildings. It consists of a metal grid that is suspended from the
ceiling, and ceiling tiles that are placed within the grid.
To install a German type ceiling system, the following steps should
be taken:
Measure the area where the ceiling system will be installed to
determine the amount of materials needed.
Mark the ceiling for the location of the grid system.
Install the perimeter molding around the ceiling.
Install the hanger wires to suspend the main runners of the grid
system from the ceiling.
Install the main runners of the grid system.
Install the cross tees of the grid system.
Place the ceiling tiles into the grid system.
Install the lighting fixtures and any other necessary accessories.
With strong flexibility, easy construction and simple maintenance,
the ceiling system can meet various interior decoration needs and
provide diverse design solutions and decorative effects. It can be
used to improve the light, acoustics, heat insulation, thermal
insulation, fireproofing and other properties of indoor spaces,
while also hiding pipes, wiring, equipment and other cluttered
indoor facilities, beautifying the indoor environment and improving
the comfort of use.
Product Application
1. Educational Institutions: Light steel keel gypsum board ceiling
systems are often used in schools, universities, and other
educational institutions. They provide a safe and comfortable
learning environment, and are particularly useful for soundproofing
and reducing noise levels in classrooms and lecture halls.
2. Industrial Buildings: Light steel keel gypsum board ceiling
systems can also be used in industrial buildings, such as factories
and warehouses. These systems are durable and can withstand harsh
environmental conditions, making them ideal for use in areas with
high humidity or temperature.
3. Renovation Projects: Light steel keel gypsum board ceiling
systems are a great choice for renovation projects. They are easy
to install and can be used to cover up old and damaged ceilings,
providing a fresh and modern look to any room.
