1.LT Series High Speed Centrifugal Spray Dryer
Product Description
Main Features
1.The drying speed is fast, and the surface area of the material
liquid is greatly increased after atomization. In the hot air
flow, 95% - 98% of water can be evaporated instantly, and the
drying time is only a few seconds. It is especially suitable for
the drying of heat sensitive materials.
2.The product has good uniformity, fluidity and solubility, high
purity and good quality.
3.The production process is simple and easy to operate and control.
The liquid with moisture content more than 90(40% - 60% for special
materials) can be dried into powder products at one time. After
drying, there is no need to crush and screen, which reduces the
production process and improves the product purity. The particle
size, bulk density and moisture of the product can be adjusted by
changing the operating conditions within a certain range, which is
very convenient for control and management.
LT series high speed centrifugal spray dryer is a new type of
high-efficiency drying process equipment, which can make solutions,
emulsions, suspensions, and paste liquid materials through spray
drying into dry powder, fine and medium particles.
LT series high speed centrifugal spray drying machine has fast
drying speed, high efficiency, few processes and labor saving. The
product quality is stable, and the finished product has good
fluidity and good solubility after drying. It has the advantages of
high purity and good environmental sanitation. It is beneficial to
increase the output and obtain good process technology and economic
benefits.
LT series high speed centrifugal spray drying equipment is
especially suitable for heat-sensitive materials, drying can keep
the color, aroma and taste of the dried materials unchanged. It has
a bright future in chemical, fine chemical, light industry, ceramic
materials, electronics, food, biology, Chinese and Western
medicine, biochemistry, environmental protection and other
industries.
Main Features
* Drying speed is very fast;
* Product quality is good;
* Product has good dispersibility, fluidity and solubility;
* Production process is simplified, easy to operate and control;
* The air drying chamber wall of the drying chamber is used to
eliminate or reduce the stick wall phenomenon;
* Drying chamber wall and roof top adopt air cooling system to
prevent material from melting hot wall;
* The powder collection system uses dehumidification air cooling
technology to prevent moisture absorption and agglomeration of the
product and facilitate product packaging;
* Meets the requirements of GMP national standards, and the air
cleanliness of contact with materials reaches.
Types of Dry Products (Parts)
| * Polymers and resins | * Tannic acid |
| * Dyes, colors, pigments | * Non-staple food, blood and fish products in slaughterhouses |
| * Ceramic materials, glass ceramic sand | * Detergents and surface stains |
| * Rust remover fungicides insecticides | * Ingredients |
| * Carbohydrates and similar products | * Organic chemicals |
| * Dairy and eggs | * Inorganic chemicals |
| * Food and plant extracts | * Cellulose |
| * Chinese and Western medicines, biological fermentation products | * By-products and other sundries, etc |
Technical Parameter
| Model | LT High Speed Centrifugal Spray Dryer |
| Max. Water Evaporation Capacity (kg/h) | 5 | 25 | 50 | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 1000 | 1200 | 2000 | 3000 |
| Inlet Temperature (℃) | 140-350 ℃ |
| Out Temperature (℃) | 80-90 ℃ |
| Spray Type | High Speed Centrifugal Atomizer |
| Atomization Rotated Speed (RPM) | 25000 | 18000-22000 | 15000-22000 | 12700 | 11800 |
| Spray Disc Diameter (mm) | 60 | 120 | 150 | 180 | 210 |
| Heating Sources (Option) | Oil, natural gas, coal gas, liquefied gas, marsh gas, coalmine,
steam, electricity, etc. |
Remarks: Water evaporation capacity depends material property,
solidcontent, warmairinlet & outlet temperature.
