Two Cutting Two Punching Silicon Steel Transformer Core Cutting
Machine
Quick details of transformer core cutting machine HJX400-LL
- Cutting thickness 0.2 ~ 0.35mm
- Cutting width 40 ~ 400mm
- Feeding speed 120m/min
- Power 12.5kw
- One year warranty
Description of transformer core cutting machine HJX400-LL
Transformer core cutting machine HJX400-LL is a special cutting
machine for cutting silicon steel to make transformer iron core.
The transformer core cutting machine features:
1. The transverse shear line adopts single-side location and manual
width adjustment. Servo power and full-automatic PLC control system
are adopted.
2. Punching and cutting are driven by servo motors at high
efficiency, high precision, low noise and low failure rate.
3. AC servo system and controller are adopted in feeding system to
realize precise determination of length.
4. HMI is adopted and operators can easily accomplish choice of
lamination forms, input and modification of parameters, etc.
Through the touch screen.
5. Manual and automatic separation and stacking of materials for
quantitative shear.
Main parameters of transformer core cutting machine HJX400-LL
The standard specifications of transformer core cutting machine
HJX400-LL is shown below, however, the cutting machine can also be
manufactured as requested.
| Technical Specifications | HJX400-LL |
| Cutting thickness | 0.2 ~ 0.35 mm |
|
| Cutting width | 40 ~ 400 mm |
| Cutting length | 350 ~ 9999 mm |
| Feeding speed | 120 m/min |
| Cutting angle accuracy | ±0.025° |
| Cutting length accuracy | ±0.1 mm |
| Cutting burring | ≤0.02 mm |
| Installation capacity | 12.5 kw |
Fig 1:Cut to length line HJX400-LLB's side view
Fig 2: Cut to length line HJX400-LLB's coil dereeler
