rail wheel axle from china good quality railway wheel set steel rail wheels 42crmo steel from rail wheels factories

Detailed specification of rail wheel axle from china good quality railway wheel set steel rail wheels 42crmo steel from rail wheels factories

Forging a wheel blank from a steel block,forging operation forms the rough contour of the wheel,wheel rolling,this complicated geometric shape including configure different parts made by simultaneous various rolls.heat treated,1650°F temperature hardening the furnace of entire wheel heating and spinning wheel with a water-spray quench.Final and most important step:ultrasonically inspection to evalutae the internal quality of wheels.

A good wheel must have the feature of perfect combination of hardness for wear resistance , the strenght and toughness!

In the heavy haul industry,we have many comprehensive product lines . Whatever your requirements, our Kingrail can deliver the highest quality, most reliable rail wheels for the long haul accordingly.

Wheels tough enough ,72% longer wheel life . lower freight car operating expenses, less time for wheel maintenance to 72% reduction in wheel-set removals translates into. enhanced “fluidity of the service.” Made from a patented material that provides increased resistance to thermal degradation, our various wheel can take the heat at higher temperatures. Available wheel in various diameters for rail -road vehicle and even locomotives.

View of forged and rolled wheel steel wagonways wrought-steel wheel mild steel rail wheel:

Package of forged and rolled wheel steel wagonways wrought-steel wheel mild steel rail wheel:Wheels are packed by iron pallets with rings.

Rail steel wheel -rail wheel axle from china good quality railway wheel set steel rail wheels 42crmo steel from rail wheels factories

• 1. Material: cast steel or cast iron;

  Carbon steel:C45, C50, C55, C60, 4330, C35, 65Mn

  Alloy steel:4140, 42CrMo, 40CrNiMo, 4340,34CrNiMo6

• 2. Constitute: two wheels, one axle, four bearings, and other parts,oem wheels;
• 3. Loading capacity: 1-300 tons, can be customized.
• 4. The type of the wheels: single flange wheel, double flange wheel, hollow wheel sets and solid wheel sets;
• 5. The diameter of the wheels: 300mm, 350mm, 400mm, 450mm;500mm; 900mm, etc.
• 6) Heat treatment: normalizing, Q&T ,Surface and rim quenching with depth: 5-20mm
  7) Measuring & testing equipment:Projecting profile, roughness tester, hardness tester, concentricity tester ect, UT ,MT
  8)Size:Customized designs are available.
  9)Inspection:In-house and the third party.

STANDARD OF CHEMICAL COMPOSITION FOR STAINLESS STEEL MATERIAL(%)

we produce wheels with such close tolerances that they are better balanced than other wheels, contributing to maximum traction and longer wheel life.

when your railcars rolling in some of the tough railroad environments, the wheels made by our experience, dedication and efficiency in heavy haul operations is unequaled,which to be machined and restored to its original shape multiple times during its lifetime.

Main Testing and Inspection Device

Our Equipments:

The total production area of Kingrail Parts is 55, 000 square meters, including a 40, 000 square meter factory and 10, 000 square meter warehouse. The production mill covers over 100, 000 square meters equipped with steel rolling and casting lines, rail elastic clip lines, fish plate lines, spike & Bolt lines, heating treatment line and surface anticorrosion treatment line as well as electro galvanizing, hot galvanizing and Dacromet processing lines. Our technical force is strong, the inspection method is complete, we can strictly implement the national railway standards for production.Rockwell hardness tester services we can provide:

1. Our railway products comply with AREMA, DIN, BS, UIC, GOST, NF, JIS, GB and other standards.

2. We can customize railway fasteners products according to your samples or drawings.

3.Fast , Convinient Services with High quality products but competitive price.

4. Complete quality inspection procedure to every batch of shipment before delivery.

5. After-service can be warranty last to 3 years of any questions from our customers.

Our aim is to serve customers by providing the the most optimized solution according to the needs of production and meet the satisfaction.

Railway parts products we can provide:

1, Rail Spike Series: Rail Screw Spike, rail Dog Spike, rail Elastic Spike etc.

2, Track Bolt series: Track Bolt, Segment Bolt, Metro Bolt, Tunnel Bolt, Hex Bolt, Square Bolt, Turnout Bolt, Fishtail Bolt, T bolt etc

3, Rail Clip series: Nabla rail Clip, Elastic rail Clip, SKL rail Tension Clamp, O rail Clip, Gauge Lock Clip etc

4, Steel Rails series: Railway rails, Crane Rails, Mining Rails, Over the head Rails, etc

5, Steel rail wheels series: Train Wheels, Crane Wheels, Hi-rail vehicle wheels, etc

6, Other materials and accessories: Rail Gauge Insulator, rail rubber Pad, rail Fish plate, Nut, rail Plastic Dowel, rail Tie plate, Spring Washer, Flat Washer, Cast Iron Insert, Anti Creeper, rail Gauge Rod etc.

We all know that wheel exchanging frictional forces with the rail will cause the regular wear of railroad wheels.So when these occur on the wheel: traction, braking and especially curve negotiation. wear is produced by longitudinal tractive/braking efforts and tends to concentrate on the central portion of the wheel tread when in traction and braking, the process of wear formation during curve negotiation is more complicated involves both longitudinal frictional forces. There are the rolling radius difference between the inner and outer wheels and transversal frictional forces caused by the wheelset travelling along the curve with a non-zero angle of attack.

We are located in the city Maanshan which is a steel city with our high-quality steels, so that is the base suitation for us to produce top-class forged wheels with the standrads that meet the needs of a high-speed rail network.

Welcome to the Kingrail website. We're glad you stopped by and trust you will have a happy tour.

Kingrail is an international company offers diversified range of high-tech products and services and operates globally.

Core business is identified with three divisions:

1. High-end railway components – wheels, axles and wheelsets for high-speed applications, locomotives, passenger trains, trams and underground trains., rail road cars, light rail, street car, ballast vehicles, etc

2. Railway track materials: Tie plates, fishplates, clips, screw spikes, steel rails, etc

3. Forging and casting to drawings, for various applications such as power generation, oil and gas, offshore platforms, cement works, industrial plants, iron and steel production plants or shipbuilding.

Whether you need components or integrated systems, global tracking technology or performance analytics,Kingrail is always here at service for you!

Since 2002, we've been committed to having the world's highest standards in railroad wheel sets. But we don't set the standards; our customers do.

The hard and smart-working employees of Kingrail are dedicated to putting customers first. Over 200,000 squares of manufacturing space. We're armed with modern equipment, progressive production methods, and the confidence that comes with years of experience. We can take on any job. No matter what it is.

With roots deeply embedded in the railroad industry, we've grown to be a world-class supplier of customer satisfaction. From your first contact with us to the delivery of the product, we strive to make it easy for you. Kingrail staff are happy and pride working here because they love and happy for the job, care and happy for all the job they do.

So feel free to put us to the test – with something easy, or better yet, with something impossible. We're ready to show you what we can do.

Maanshan Kingrail Technology Co.,Ltd. is pleased to introduce ourselves as one of the leading manufacturer, stockist and supplies of Railcar spares and Railway Track Materials, Railway equipment, forging and casting metal products!

Equipped with forging lines:3T electro-hydraulic Hammer,2500T Hot Die press,1600T Hot Die press,400T Double plate Friction press,300T Double plate Friction press, Kingrail also equipped with fully machining and inspection equipment, Main machining equipments:CNC Lathes,Painting line,Continuous Heat-treatment Line,well type Furnace,Cutting machine,Robots, Main testing equipments;OES Metals Analyzer,CMM,Universal hydrankic testing machine.

Invest about 8% of the sales volume to be the R&D expenses, Kingrail introduce the world's leading technology combined with international high-tech talent to ensure the stable development of the company,and maintain long-term competitive advantage.

Kingrail have exported products over 50 countries such as US, Canda, UK, South Africa, Kenya, India, etc. Competitve quality and service are spoken highly by worldwide customers!

Kingrail made strict rules on all products, customer service is customer core value! 

Our vision:

* To be best supplier with world-Leading Capacities!

* 100% customer satisfication!

We are not the best now, but we strive to be better and better!