Stainless Steel Circular Lining Design High Pressure Accelerated
Aging Tester
Features:
1. The double-circuit structure of imported high-temperature
resistant solenoid valves is adopted, which reduces the failure
rate to the greatest extent.
2. Independent steam generating room, to avoid direct impact of
steam on the product, so as not to cause local damage to the
product.
3. The labor-saving structure of the door lock solves the
disadvantages of the first generation of disc-type handles, which
are difficult to lock.
4. Exhaust cold air before the test; the design of exhaust cold air
during the test (the air in the test tank is discharged) improves
pressure stability and repeatability.
5. Ultra-long-term experimental operation time, long-term
experimental machine operation for 400 hours.
6. Water level Protection, through the detection and protection of
the water level sensor in the test room.
7. Pressure-resistant design, the box can withstand a pressure
(150°C) of 2.65kg, which meets the water pressure test of 6kg.
8. Two-stage pressure safety protection device, using a two-stage
combined control Device and mechanical pressure protection device.
9. Safety protection pressure relief button, emergency safety
device two-stage automatic pressure relief button.
10. Bias test terminal withstand voltage up to 3000V (optional)
11. USB export history data curve
Parameter
| Set temperature | +100 ℃ ~ +132 ℃ (steam temperature) |
| Humidity range | 60 ~ 100 % vapor humidity |
| Humidity control stability | ±3%RH |
| Operating pressure | 1.2~2.89kg (including 1atm) |
| Time range | 0 Hr ～ 999 Hr |
| Pressurization time | 0.00 Kg ～ 1.04 Kg/cm about 45 minutes |
| Temperature fluctuation uniformity | ±0.5℃ |
| Temperature display accuracy | 0.1°C |
| Uniformity of pressure fluctuation | ±0.1Kg |
| Humidity distribution uniformity | 3%RH |
Material of The Test Chamber
2.1 Test chamber size: HD-YC40 (∮400 mm x L500 mm) circular test
chamber
2.2 Overall dimensions: 900x 850 x 1800 mm ( W * D * H ) vertical
2.3 Material of inner barrel: stainless steel plate material (SUS#
316 3 mm)
2.4 Material of the outer barrel: stainless steel plate material or
plastic spraying
2.5 Thermal insulation material: rock wool and rigid polyurethane
foam insulation
2.6 Steam chamber heating tube: titanium tube heating, never rust.
2.7 Control system:
a. Use Taiwan-made Delta color touch PLC to control humidity and
steam temperature (use PT-100 platinum temperature sensor).
b. Using a pointer to display the pressure gauge.
c. Microcomputer P.I.D automatically calculates and controls
saturated steam temperature and steam humidity.
d. Manual water inlet valve (automatic water replenishment
function, continuous test without stopping the machine).
e. Test data record U disk export, curve query.
2.8 Mechanical structure:
a. Round inner box, stainless steel round test inner box structure,
in line with industrial safety pressure vessel standards, can
prevent condensation and drip during the test
Design
b. Circular lining, stainless steel circular lining design, can
avoid the direct impact of steam latent heat on the test object.
c. Precise design, good air tightness, less water consumption, and
can run continuously for 400Hrs each time adding water.
d. The patented appearance design makes the door and the box more
closely combined, which is completely different from the
traditional extrusion type, and can prolong the service life.
e. Automatic safety protection of critical point limit mode,
abnormal, cause, and fault indicator light display.
2.9 Security Protection:
a. Imported high temperature resistant sealed solenoid valve adopts
double circuit structure to ensure no pressure leakage.
b. The whole machine is equipped with overpressure protection,
over-temperature protection, one-button pressure relief, and
multiple safety protection devices for manual pressure relief.
Guarantee the use and safety of users.
c. Anti-pressure door lock device, when is pressure inside the test
chamber, the test box door cannot be open.
About Company
