Continuous High Performance Aluminum Brazing Furnace Industrial
Radiator Furnace 650 degrees Brazing section
Product supply scope:
1.Fluxing chamber
2.Drying chamber
3.Front curtain chamber
4.Heating chamber
5.Air cooling system
6.Rear curtain chamber
7.control system
Product features:
1) The aluminum radiator brazing furnace line adopts high
performance porcelain fiber cotton material for heat preservation
purpose. The furnace is able to rise to 630℃ from the ambient
temperature in around 2 hours.
2) The zones of the aluminium radiator brazing furnace are divided
based on upper, lower, rear and back area. The heating power is
adjusted through power and voltage regulator so that the furnace
could achieve an ideal temperature uniformity of ±1℃. The brazing
area could achieve a temperature uniformity of ±2℃ so that it could
meet the brazing requirements.
3) The dry air cooling room is set with a slag cleaning chamber.
There is a side door of the slag cleaning chamber for allowing the
worker to clean the flux slags. In comparison to the traditional
water cooling chamber, the dry cooling room doesn't have the risk
of corrosion because of water and deformation of the chamber
because of cold and heat. There is no need for cooling water.
4) power at temperature rising stage: 100%; power at the brazing
stage: ≤60%
Product quick details:
Maximum service temperature:650℃
Furnace temperature uniformity:±3℃
Mesh belt operating surface height:900mm
Normal operating temperature:600～650℃
Effective working size:1000mm(Mesh belt width)×250mm(Height of mesh
belt)
316L stainless steel muffle is used for the main brazing area.
conveying chain:SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm
About us:
With our understanding of the industry, we have been helping
foreign customers to set up radiator factories and provide the
production machine in the region in the past five years. We provide
customers with pre-sale and after-sale equipment design and service
according to the size of our products.In the meantime we will also
provide the material to our customers as well. We will send
technicians to guide the installation on site to ensure the smooth
production of the customer's factory, and provide free consultation
service in case of any doubt in the production process.
Most of the products are sold to all countries and regions in the
world, and have accumulated rich production experience.Our company
is good at manufacturing all the process of the radiator tank
production line.In recent years,many companies from other countries
in the same industry also bought the CKD from us and purchased the
machine equipment from us as well.
If you are interested in setting up a radiator factory in your
place or buying any products , please contact us and we will
provide you with the best service and best price.
FAQ:
1.What’s the style of spray of the aluminum Brazing furnace
machine?
The spray of the aluminum Brazing furnace machine can be divided
into dry electrostatic powder spray style and aqueous solution
spray style.
2.Does the aluminum Brazing furnace machine use gas?
The aluminum Brazing furnace machine can use natural gas as a
productive energy source.
3.How to know what kinds of specifications of the aluminium brazing
furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the
core and the dimensions of the production workshop.The engineer
will give the best cost-effective solution according to the
information provided.
