Layer 2 Managed Ethernet Switch with Full Ggiabit 8 port PoE+ + 2
Combo Ports
Technical Parameters
| Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch |
| Port | 2 x 1000Mpbs SFP port, 1G/2.5G both supportive SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km; MM: 1310nm, 2Km; 850nm, 500 meters 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP,
IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344,
IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af,
IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode: Storage and forward System bandwidth: 20Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port, transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
| LEDs | Power, network, fiber |
| Power supply | POE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 15.4W (port 1~8) (802.3at/bt standards required special instructions) |
| Environment | Working Temp: -40°～ 85°C; Storage Temp: -40°～ 85°C Working
humidity: 10%～90%, non-condensing; Storage humidity: 10%～95%,
non-condensing |
| Industry Standards | EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3, EN 61000-4-8; Traffic Control: NEMA-TS2; Vibration:
IEC 60068-2-6; Freefall: IEC 60068-2-32; Shock: IEC 60068-2-27;
Rail Traffic: EN 50121-4 |
| Safety | CE Mark, commercial; CE/LVD EN60950 |
| Mechanical information | Shell: Corrugated metal shell; Safety class: IP40; Dimension: 165 x 112 x 45.5mm; Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Product Features
8 x 10/100/1000Mbps auto-sensing RJ45 ports, 2 x 1000Mbps COMBO
ports
2 x 100/1000/2500Mbps SFP fiber ports, 1 x CONSOLE port for
management
IEEE 802.3af/at/bt (15.4W/30W/60W/90W) power on to 1 ~ 8 RJ45
ports, 720W budget
Support POE managed, enable/disable the POE ports, set the POE
power-on delay and POE output power
Real-time display of voltage, current, power and PD level
Support relay alarm output and alarm status light display(2
way-from dry contact)
4KV Ethernet surge protection, adapt to a harsh outdoor environment
Support Auto MDI/MDIX
Flow control mode: full duplex with IEEE 802.3x standard
half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
A store-and-forward switching mechanism
Management Software Features
Support cable diagnosis and can locate the fault point
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management,
optimize power consumption
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
Support Qos, transport classification Qos, Cos, bandwidth control
(input/output direction), storm suppression, differentiated
services
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
Protocol VLAN,VLAN convert, MVR
Support dynamic IEEE802.3ad LACP link aggregation, static link
aggregation
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating,
IGMP searching
Support IGMP agent report, MLD snooping
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL,
TACACS+,HTTP/HTTPS, SSL/SSH v2
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Support software upgrade via TFTP and HTTP, firmware redundancy
prevents upgrade failing
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option
82
Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP,
IEEE802.1ab LLDP
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL,
NTP/SNTP,TFTP, QoS, ACL.
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
