M25 Diaphragm Kit For Turbo Pulse Valve FP25 DP25 EP25 SQP25
Introduction:
M25 Diaphragm (Membrane) for Turbo pulse valve FP20, FM20, FP25,
FM25, DP20, DM20, DP25, DM25, EP25, EM25, SQP20, SQM20, SQP25,
SQM25, FDP20, FDM20, FDP25, FDM25; NBR material is standard,
working temperature range is -5 to +80 ℃; material is optional, for
high temperature, working temperature range is -10 to +120 ℃. Pulse
Jet Valve is a solenoid pilot operated diaphragm valve specially
designed to deliver extremely fast pulsing in reverse-jet dust
collector systems. With its high flow rates, higher peak pressure
and the fastest response times on the market it delivers optimal
filter cleaning performance, while using significantly less air.
This results in energy savings for the user.
| Product Materials | NBR,NR |
| Operating Temperature | -20℃~80℃ |
| Service Life | ≥1000000 times |
| Usage Scenario | Bag filter devices /precipitator equipment |
Features:
Fabrication technics of textile makes the product tear resistance
stronger
High quality raw materials ensure the excellent performance of the
material itself
Working principle:
The electromagnetic pulse valve diaphragm divides the pulse valve
into two air chambers. When the pressure of the rear air chamber
makes the diaphragm close to the air outlet of the valve, the pulse
valve is in a closed state, the pulse controller outputs a signal
to move the armature of the pulse valve, the vent hole of the air
chamber behind the valve is opened, and the rear air chamber
quickly loses pressure, making the The diaphragm moves backward,
the compressed air is blown through the outlet of the valve, the
pulse valve is in the open state, the injection starts, the
electrical signal output by the pulse controller disappears, the
electromagnetic pilot of the pulse valve is reset, the vent hole of
the rear air chamber is closed, and the back When the pressure of
the air chamber rises, the diaphragm of the pulse valve is close to
the air outlet of the valve, the pulse valve is in the closed
state, and the injection stops. The length of the injection time is
controlled by the controller.
Application:
Referred to the dust collector, it applies to waste gas dust
filtering of Cement plant, Steel mill, Power station, Electrolytic
aluminium factory, Incineration plant, crushing mixing conveying of
Chemical plant, crushing mixing sieving grinding of Pharmaceutical
plant, raw material mixing packing of Paper mill, bagging mixing of
Dyeing mill, crushing gagging conveying and mixing of Fertilizer
plant, crushing plasticzation conveying of Kilns, sawing polishing
filing of Log mill, etc.
Our service:
1. Packaging is neutral packing or customized packing.
2. We will reply you within 24 hours.
3. We will also provide you with good after-sales service.
4. OEM or ODM orders are welcomed.
5. Trial orders are acceptable.
6. High quality and factory price.
7. 100% ensured the quality.
