Auto Laminator 1450mm High Accuracy Flute Lamination Machine
Laminating Corrugated Carton
The paper can be laminated with paperboard to increase the strength
and thickness of the material or special effects. After the
die-cutting, it can be used for packaging boxes, billboards and
other purposes.
Structural features:
Adopting the world's leading transmission control system, only need
to input paper size system auto-tuning.
Computerized high-speed fitting, up to 150m/min.
Chuanliu-type air supply head, with four sets of forward nozzles
and four sets of suction nozzles.
Feed Block adopts low stack cardboard, which can fit the paper to
the pallet, and can install track-assisted pre-stacker
Use multiple sets of electric eyes to know the advance position of
the bottom line, and make the servo motor on both sides of the face
paper to independently rotate to compensate the upper and lower
paper alignment, which is accurate and smooth.
Full-function electronic control system, using human-machine
interface and PLC program model display, can automatically detect
operating conditions and work records.
Automatic glue replenishment system can automatically compensate
for lost glue and cooperate with glue recycling.
Specifics:
| Model | ZGFM-1650 |
| Max Sheet | 1650×1650mm |
| Min Sheet | 450×450mm |
| Top Paper Thickness | 150-800g |
| Max Speed | 150m/min |
| Fitting Precision | ±1.5mm |
| Machine Power | 20KW |
| Bottom Paper Thickness | ≤10mm(A-F corrugated board) |
BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING
Use imported Servo motor electric controlling system, with Japan
NITTA suction belt to make suction power inverter, and belt cleaned
by water roller; Patented technology to ensure corrugate and
cardboard goes out smoothly and simple operation.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed auto dedicated feeder, both paper lifting
and feeding nozzle can freely adjust angle to the paper, to ensure
that whether thick or thin paper can be delivered rapidly and
smoothly.
3. ELECTRICAL SYSTEM
Designed in the accordance with European CE requirement, ensure
machine stability, high efficiency and low failure. Using
man-machine interface and PLC combination, display all the
information, such as warning, error detect, failures, and operating
speed, etc on the screen at a glance.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve
efficiency.
The special design of the pre stack paper frame, save time and
effort.
5. TRANSMISSION
With imported double teeth belt drive and Switzerland ROSTA tension
device ensure the drive accurate, stable and low noisy.
6. POSITIONING SYSTEM & GLUE ROLLER
The use of multiple sets of photoelectric sensor at bottom sheets
relative position, control top sheets on both sides of the servo
motor to do independent compensation action, so that accurate
positioning of top paper and the bottom paper.
Stainless steel roller, never rust, after narrowly grinding,
guaranteed the minimum amount glue coated evenly.
Down roller be cleaned by water roller.
7. TOUCH SCREEN OPERATION SYSTEM
It adopts the centralized control of the touch screen, realizes the
man-machine dialogue with the high-resolution man-machine
interface, and realizes the real-time dynamic monitoring of
operation and fault, making it more convenient to adjust and
troubleshoot
