Fully Automatic High Speed Intelligent Flute Laminator Sheet To
Sheet Laminating Machine
1. Model Overview
The machine is suitable forpaperboard and corrugated paper,
cardboard, and motion controller and servo correction system. By
using the relative positions of multiple sets of photoelectric
induction paper, the servo motor on both sides of the control paper
is independently compensated, and the position of the paper is
tracked to make the paper and the bottom paper accurately
positioned. The intelligent high-speed laminating machine is easy
to oprate, and you can adjust the paper size automatically by
one-touch.
2. Structure
A. Upper Paper Feeder: It can send stacks of 120-800gsm paper from
above.
B. Bottom feed: It can send 0.5~10mm paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed
paper.
D. Regulatory organization - Fits the two papers according to the
set tolerances.
E. Pressurizing Conveyor... Presses the attached paper and conveys
it to the delivery section.
3. Parameters:
| Model | ZGFM1500 | ZDFM1700 | ZGFM1900 | ZGFM2200 |
| Max size | 1500*1500mm | 1700*1700mm | 1900*1900mm | 2200*2200mm |
| Min size | 360*380mm | 360*400mm | 500*500mm | 500*500mm |
| Top sheet thickness | 150-800g/㎡ |
| Bottom sheet thickness | ≤10mm ABCDEF corrugated board ≥300gsm cardboard |
| Work speed | 160m/min |
| Power | 20kw | 20kw | 22kw | 22kw |
| Stick accuracy | ±0.8mm |
BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING
Use imported Servo motor electric controlling system, with Japan
NITTA suction belt to make suction power inverter, and belt cleaned
by water roller; Patented technology to ensure corrugate and
cardboard goes out smoothly and simple operation.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed auto dedicated feeder, both paper lifting
and feeding nozzle can freely adjust angle to the paper, to ensure
that whether thick or thin paper can be delivered rapidly and
smoothly.
3. ELECTRICAL SYSTEM
Designed in the accordance with European CE requirement, ensure
machine stability, high efficiency and low failure. Using
man-machine interface and PLC combination, display all the
information, such as warning, error detect, failures, and operating
speed, etc on the screen at a glance.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve
efficiency.
The special design of the pre stack paper frame, save time and
effort.
5. TRANSMISSION
With imported double teeth belt drive and Switzerland ROSTA tension
device ensure the drive accurate, stable and low noisy.
6. POSITIONING SYSTEM & GLUE ROLLER
The use of multiple sets of photoelectric sensor at bottom sheets
relative position, control top sheets on both sides of the servo
motor to do independent compensation action, so that accurate
positioning of top paper and the bottom paper.
Stainless steel roller, never rust, after narrowly grinding,
guaranteed the minimum amount glue coated evenly.
Down roller be cleaned by water roller.
7. TOUCH SCREEN OPERATION SYSTEM
It adopts the centralized control of the touch screen, realizes the
man-machine dialogue with the high-resolution man-machine
interface, and realizes the real-time dynamic monitoring of
operation and fault, making it more convenient to adjust and
troubleshoot
