Export Standard 50 Micron Ss 316 Stainless Steel Mesh 300 Mesh 0.03
mm Wire
Stainless steel mesh Introduction
Stainless steel mesh is divided into stainless steel square hole
braid, and stainless steel mat type weaving mesh.
Stainless steel square hole mesh
Stainless steel square hole mesh by the number of mesh and the same
number of latitude, mesh shape for the square hole, stainless steel
square hole is divided into plain weave stainless steel mesh and
twill weave stainless steel mesh, plain stainless steel mesh
specifications for the 1-500 mesh. Twill stainless steel square
hole for the 1-635 mesh.
Filtration accuracy can be done minimum 0.015mm.
Stainless steel seats type net
Stainless steel seats type mesh by the number of head and weft
number is not the same, the number of latitude is greater than the
number of heads, weaving method for the weaving type weaving, also
known as stainless steel Dutch cloth. Stainless steel mesh type
mesh is also plain weave and twill weave, plain weave
specifications for the 40 mesh -1500 mesh, twill weaving
specifications: 200-3500 mesh, stainless steel seats with a
stainless steel square hole can not reach the filter accuracy,
Filtration accuracy can be 0.001mm minimum.
Stainless steel mesh material
Stainless steel mesh materials are 201,304,304 L, 316,316 L, 310S,
904L, 2520,2507 duplex stainless steel mesh, pure nickel, Monel
wire mesh, pure titanium mesh, Hastelloy wire mesh, special
materials can be processed Custom.
Use of stainless steel
Stainless steel mesh is widely used, stainless steel mesh is mainly
used for acid and alkali environmental conditions, screening and
filtration, the oil industry for the mud network, chemical fiber
industry for the screen, electroplating industry for pickling
network, gas, liquid filtration and other media Separation.
Involved in the industry is particularly broad, mainly used in
petroleum, chemical, chemical fiber, plastic, rubber, construction,
electronics, medical and daily home life can be seen everywhere.
| mesh | wire diameter | | hole size | |
| mm | inch | mm | inch |
| 300 | 0.03 | 0.001 | 0.05 | 0.002 |
| 300 | 0.04 | 0.002 | 0.04 | 0.002 |
