We are a professional supplier of powder coating and we worked in this field for many years
we provide many kind of powder paint, like a hammer, orange lines, grinding, highlights and inferior
smooth, crack, flash of gold, silver and other effects, have
appeared in recent years, high temperature resistant powder coating powder, powder painting at low temperature, high weather resistance, water resistance, acid
powder powder powder, low temperature curing, UV curing powder
powder and so on
Introduction:
This type of thermosetting powder coatings are applicable to
thermal transfer printing process.
The cured coating after the thermal transfer printing process, can
be clear veins, beautiful color of patterns.
Applications:
Can be widely used in aluminum windows and doors, indoor metal
furniture, security doors, car painting, etc.
Features:
This powder coating can reach the general performance requirements,
the performance of its features are applicable to thermal transfer
technology. The cured coating after the thermal transfer process,
can be clear veins, beautiful color of patterns. And the thermal
transfer film is easy to remove, no residual traces, can be
adjusted according to the different thermal transfer process recipe
to achieve the best results.
Applying Condition: Pretreatment:Phosphated Chromated
Coating method:Electrostatic-fluidized bed coating;Corona electrostatic spray
coating;Tribo-electrification coating
Curing condition: 200°C/10min or 180°C/15min or 160°C/20min
Packing: Double pvc bag,net weight is 20KG each carton
Storage: Dry room with good ventilation, Temperture is lowder than
30°C,avoid direct
sunlight.There are 12 months to maintain under this
condition.Expired prod
ucts still cannot be used unless testing results meet the
utilization standards
Health and Safety: There are no hazardous ingredients in all the
raw materials of powder coatings
and no hazardous gas will be released while using.However,the
inhalation of
dusts should be avoilded.An operator should wear an anti-dust mask
and try
best to avoid long-term contact with the powder coating.Those
coaings sticked
on the skin should be washed by soap
