Easy integration double safe reliable swing gate barrier turnstile
Swing barrier description:
CF series swing barrier design is simplified to achieve optimum
function at more affordable cost. Control system mechanism is
modular for easy maintenance servicing and part replacement.
CF series swing barrier is typically used together with flap
barrier or turnstile as manual lane for handicapped user in
building lobby. Ideal for low traffic and light duty site that
requires more affordable solution.
Swing barrier specification:
| Description | Parameters |
| Lane Width | 900-910mm |
| IP | IP54 |
| Pass Speed | 30 persons/min |
| Power supply | AC220V/110V,50/60Hz |
| Drive Mode | Motor drive |
| Max Power Consumption | 200W |
| Opening time | 0.5S |
| Humidity | ≤90% coagulation free |
| Noise | ≤50dB |
| Service Life | 5,000,000 cycles |
| Outside packing | 145x110x36cm |
| Working Environment | -20°C~+60°C |
| Gross Weight | 85KGS |
Swing barrier features:
1. RELIABILITY
Patented compact mechanism ensures the long life of the lubricating
oil inside and high quality electrical
components.
2. WIDEST OPENING
Compared to tripod turnstile and flap barrier, swing barrier allow
widest opening clearance.2 unit swing barrier can be installed on
same lane to give maximum clearance 910 mm (inclusive 10 mm
clearance).
3. CUSTOMIZE OPENING
Swing barrier allow customizable opening. The wing can be cut short
according to clearance available at site to achieve perfect
fitting.Control system will auto synchronize both swing barrier
installed in the same lane. Both swing barrier will open and close
at the same time.
4. EASY INTEGRATION
A push button or access control reader can be used to trigger the
swing barrier to open via simple dry contact signal. After delay
timer elapsed, swing barrier will automatically close back by
itself.
5. DOUBLE SAFETY
Optional IR sensor can be installed to auto reverse the gate if
obstacle is detected during closing. This prevent the closing gate
to hit user that is still in the lane passage.
6. EMERGENCY RECOVERY
During power failure, swing barrier will automatically open for
free pass through. This will fast escape in the event of emergency.
When the power resume, swing barrier will automatically close back.
Swing barrier functions:
1. Control signal
From the remote control panel or a wireless remote control(in the
pulse control mode).
From access control system via a controller (in either pulse or
potential control mode).
The turnstile is a normally closed unit(N/C),it is remains unlocked
until it receives a valid authorization or is unlocked with a
mechanical release key.
If integrated into a fire alarm system,the turnstile can also be
automatically unlocked by fire alarm signal.
2. Direction indicator
Green Arrow indicates that the turnstile is unlock to permit a
passage and shows the direction of authorized passage;
Red Cross indicates that passage is not allowed and shows that the
turnstile remains in locked status.
3. Operation modes
Single passage in the set direction(the turnstile is open for one
passage in the permitted direction and closed in the opposite
direction).
Bi-directional single passage(the turnstile is open for one passage
in each direction).
Free passage in the set direction(the turnstile is open for
multiple passages in the permitted direction and closed in the
opposite direction).
Free passage in the one direction,single passage in the opposite
direction(the turnstile is open for multiple passages in the
permitted direction and one passage in the opposite direction).
Always free(the turnstile is open for entry and exit).
Always locked(the turnstile is closed for entry and exit).
