Vacuum Infusion Resin Flow Netting, Green Color, Vacuum Infusion
Fittings , PP Materials
1. Description of Production
Vacuum Infusion Fittings is used in resin infusion projects to
distribute the resin across and throughout the laminate. The mesh
is a "criss cross" pattern of flexible plastic that facilities
resin flow ensuring that resin reaches all the parts of the part.
infusion mesh can also be used selectively to increase resin flow
to certain areas of the mould and increase the speed with which the
project infuses. Infusion mesh can be used in multiple layers where
even greater resin flow is required.
Like most other elements of vacuum bagging or resin infusion
"stack" infusion mesh cannot be reused once resin has flown through
it and therefore should be considered a disposable consumable of
the process.
The tight, low profile crisscross pattern of the infusion mesh
distributes a controlled, predictable flow of resin throughout the
laminate efficiently and with little waste. The resin will flow
slightly slower compared to the red infusion mesh.
The infusion mesh is typically used as a single layer and is placed
on top of the peel ply layer. Where even greater resin flow is
required, the infusion mesh can be used in multiple layers.
2. Specification of Production
| Material | pp |
| Mesh type | Diamond |
| Hole size | 3mm * 2mm |
| Weight | 100g - 120g / sqm |
| Width | 1200mm |
| Length | 100m (Customized) |
| Color | Green, Black, Wihte, Red (Customized) |
| Hole shape | Diamond |
3. Application
► Wind turbine blades
► The flow and infiltration of resins
► Water and air filter applications
► Fencing screen / garden fencing, temporary and permanent
applications
► Vacuum assisted forming of composite materials
4. Features
► Even hole
► Light weight
► Stable performance
► Strict structure
► Good toughness
► Shock resistance
