Portable Pipe Cutting Machine, Beveling Machine, oil gas pipeline
beveling machine, Split Frame Structure
Portable Pipe Cutting & Beveling
The series machine is ideal for all types of pipe cutting &
beveling and end preparation. The split frame design allows the
machine to split in half at the frame and mount around the OD of
the in-line pipe or fittings for strong, stable clamping. The
equipment performs precision in-line cut or simultaneous cut/bevel,
single point, counterbore and flange facing operations, as well as
weld end preparation on open ended pipe, Ranging from 3/4” to 56
inches O.D.(DN20-1400), on most wall thicknesses and material.
Application
■ Oil & Natural gas;
■ Refinery;
■ Shipbuilding & Oceaneering;
■ Power plant;
■ Water treatment;
■ Boiler plant.
Features
■ Cold Cutting and Beveling, no heat affected zones
■ Aeronautical aluminum material ensure portability
■ Low axial and radial clearance
■ Full closed bearing and driving gear system for operation safety
■ Machining OD of pipe from 2” up to 84”
Specification
■ Drive Options: Pneumatic, Hydraulic, and Electric
■ Air requirements: 2-3m³/min
■ Hydraulic requirements: 65L/min,10MPa (15.8GPM,1500PSI)
■ Electric requirements: 220V/AC 50/60Hz
■ Feed mode: Star wheel, automatically
■ Feed rate: Fixed@0.08mm per circle
■ Used for pipe material: carbon steel, alloy steel, stainless
steel, duples stainless steel, nickel alloy
Beveling type
Manufacture
Working On Site
