Thermostatically Heating Transformer Oil Purifier Machine 9000Liters / Hour

Fully Enclosed Type Onsite Power Station Use Insulation Oil Purification System 9000Liters/Hour

Technical Parameters:

Application:

Fully Enclosed Type Onsite Power Station Use Insulation Oil Purification System 9000Liters/Hour, is mainly used for power plant, power transmission and all power field to do on-site filtration work for transformer oil, insulating oil, dielectric oil, mutual oil, switch oil, and so on. The machine is especially for purifying the insulating oil in all kinds of large power equipment that are above 110KV, especially for the altitude is over 500-1000 meters.This Oil dehydration plant is very suitable for the large electric&insulation equipment and oil maintenance.

Features:
1. Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value ≤ 5Pa.
2. Big capacity of moisture ands gas separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength of oil improving greatly.
3. Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies, which can purify oil high efficient and make oil highly pure.
5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
6. Double-infrared liquid level sensor, pressure protective system and foaming elimination system to ensure machine operating easy and safely.
7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
8. It can be operated both online and offline of transformers.
9. Can be used independent device for vacuuming transformers which are above 110KV and can vacuum oil filling for power equipment.
10. Can work online for 150 hours continuously, high reliable and long time running.
11. Can be installed by PLC programming control system to achieve machine working fully automatically.

Advantages:
Fully Enclosed Type Onsite Power Station Use Insulation Oil Purification System 9000Liters/Hour, can quickly remove water, trace water, dissolved gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil's dielectric strength to be 75~85KV, effectively making sure electric equipment working safely and normally. It also can be an independent vacuum power supply, which can vacuum evacuating and oil injecting for transformers.

Product Introduction:
Our vacuum transformer oil purifier is developed on the characteristics of oil for electricity, especially for special high-voltage transformer above 110kv facilities. We developed the most advanced and the best special insulating oil treatment equipment successfully. Oil purification standard reaches Q/GDW122-2005. After several improvements, the device has reached domestic leading level and international similar products in the same performance parameters, with a high price-performance ratio.

This product is a combination of the international advanced film theory and atomized oil treatment technology, with a highly efficient degassing dehydration and breaking emulsification effect. Oil in this system is fully thin-film (Oil exposed area are fully expanded), and oil is increased the "journey", so that water or gas in oil is vaporized for sufficient time to reach the best effect of dehydration degassing.

The device uses electronic anti-foaming devices and high efficiency of the needle breaking foam technology to eliminate foam (patented technology) and make no "injection" phenomenon during operation.

Adopting the "Y-type" gear pump, guide wheel technology (patented technology) and VFD driving technology, we solved oil-drain problems in high-vacuum and noise problems.

Oil Purifier Technical Features:

1. Based on the high efficient vacuum oil purifier, Roots vacuum booster system and secondary high vacuum separation system are added, which enable the vacuum limit reaching ≤5Pa.

2. Being able to remove water and gas fast and effectively under high vacuum and high speed operation status, which achieves satisfactory dryness and could bring the breakdown voltage up to 70KW, resulting in an enhanced one-time filtration effect which reduces the oil aging problem existing with ordinary purifiers as caused by repeated heating.

3. Being able to remove the minimal amount of water and various gases in oil, thus ensuring zero acetylene existence. The Purifier can also serve as vacuum oil filler and dryer for transformer.

4. The advanced infrared level automatic control system, interlocking control for pressure protection and power heating system ensures long-term safe and reliable operation.

Use:

To be used for treatment to new oil, imported oil and super HV transformer oil, particularly applicable to 110KV power distribution system and the national grid, shortening the oil treating duration during installation and maintenance of transformer.

Chongqing Rexon Oil Purification Co., Ltd was built in year of 2006 and located in Chongqing city, China, which is a famous industrial machinery city. As a leading oil purifier manufacturer and oil purification technology development company, we specialized in designing, producing, developing and selling various types of oil purification equipment such as transformer oil purifier, turbine oil purifier, lube oil purifier, hydraulic oil purifier, engine oil purifier, ship oil filtration plant, used cooking oil purifier, centrifuge oil separation purifier and all other industrial oil purification machines. We offered professional oil solutions service and oil purifier machines for world-wide customers near 15 years. Our equipment can be applied to many industrial fields, such as the electric power, petroleum chemical, metallurgical industry, mine, aviation, shipping and railway, factories, and so on. We have sold products to Africa, North America, South America, Asian countries, worldwide places. And we have been to customers' on-site places to offer training and commissioning services for customers as required like Africa countries, Asian countries etc. From these years work for oil filtration and on-site oil processing, we gain rich experiences and researching in better machines and keep us developing all the time. We are aiming to save oil energy sources and save new oil cost for our customers, through purifying their old oil, and maintaining their oil cleanliness to keep their oil always in good condition as new to use into their machinery, equipment and system. And under this situation, these machinery and equipment can be always maintained well too, so their lifetime can be also prolonged largely.

We have a number of national-class oil purification experts and experienced technology engineers, mechanical designers, and machine engineers and well skilled workers, and responsible sales persons as a strong team of our REXON group. Based on our powerful technical researching and operating team support, we have offered professional oil solutions service and various kinds of oil purification machines to world-wide customers. After these years' practice in oil purifying area, we step on a much higher level of our products, and we get high reputation from customers!
Our QC department will make detailed testing and inspection on each of our oil purifier machine before packing and delivery. Every machine sent from our factory need to be tested for hours and qualified by QC department, then it has the testing certificate and allowed to be sent out of factory. Rexon company will always keep efforts on quality control and guarantee.