3600W Integrated Ultrasonic Cleaning Machine 360L for Auto Engine
Parts and Instruments
What is Ultrasonic Cleaning?
Ultrasonic cleaning uses ultrasonic energy in an immersion cleaning
tank to assist in the removal of tenacious or stubborn soils from
parts. An ultrasonic system always consists of at least three main
components:
1. A tank to hold the cleaning fluid and the dirty parts
2. A generator to transform the line voltage into an ultrasonic
signal
3. Transducers to convert the ultrasonic electrical signal into
mechanical energy
How does Ultrasonic Cleaning Work?
An ultrasonic system works by inducing controlled cavitation in the
cleaning fluid. Cavitation refers to microscopic voids or "bubbles"
that form when the transducers emit sufficient ultrasonic energy
into the fluid. The cavitation bubbles form relatively slowly and
then collapse suddenly, releasing tremendous energy against the
surfaces of objects immersed in the tank that ‘scrubs’ hard to
remove soils from the parts.
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners.
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.You could check the comparison from
below picture.
· Jewelry especially gold, silver & platinum
· Watchstraps
· Coins and other collectibles
· PCB Boards etc
· Diesel injection pumps
· Printer heads and toner cartridges
· Motorcycle radiators
· Vehicle differentials
· Milking parlor equipment·
· Golf clubs&grips&golf balls
.Horse bits&stirrups &horse brasses
· Tattoo needles· Surgical equipment
Features
SUS304 Stainless steel tank
Industrial grade integrated circuit
0~80ºC temperature range
Semiwave(28KHz) for gross rinse and fullwave(40KHz)for intensive
rinse
Auto stand-by,sleep.and wake-up by key-press mode
Power adjustable,degas function
Degassing and degreasing function
Digital controller of high-precision and long serveice-life
Why you choose us:
- Are more effective at removing contaminants;
- Are quicker to get a good cleaning effect;
- Save labor time of employees (and subsequent labor cost);
- can heat the cleaning solutions to a suitable cleaning temperature
so as to enhance the cleaning efficiency;
- Have a digital controller of high-precision and a long
service-life;· Are of high performance;
- reduce chemicals in the cleaned stuffs;· Are environment friendly
because of its recyclability
- there is no MOQ in our factory.
- Could customized the model for you.
- 1year warranty.
- engineer's technology support
- heating and power adjustable
Specification
| Model: | DK-7210D |
| Tank Size(mm): | 1000*600*600(L*W*H) |
| Overall Size(mm): | 1270*780*1060(L*W*H) |
| Capacity: | 360L |
| Frequency(KHz): | 28/40 |
| Ultrasonic Power(W): | 1800~3600 |
| Heating Capacity(W): | 6000 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
Plug
UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK PLUGE .
FAQ
Q1. Are you a factory of trading company?
We are professional manufacturer.We are warmly welcome clients from
worldwide to visit our factory and cooperation with us.
Q2. Can I get some samples?
Yes,we are honored to offer you samples of most products.
Q3. What certifications does the product get?
CE,RoHS,FCC&ISO9001.
Q4. Can we print our own brand for the fixtures ?
Of course.We are pleased to be your OEM manufacturer and meet your
OEM requirements
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.
How to use it
1. Fill the stainless steel tank with cleaning solution; turn the
single phase switch or three phases switch on; After power-on, the
LED display of the temperature displays the actual environmental
temperature; while the LED display of time displays 3 minutes
(default ultrasonic time).
2. Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase/ reduce 1℃ at a time, press
and hold there means time will increase/decrease by 10℃ .
Note: Usually, the best cleaning temperature is within 40℃ to 60℃.
The temperature displayed is the real temperature. The default
value of the temperature is 0℃. When you set temperature, the
heating function can not be started unless the set temperature is
higher than the environmental temperature and the “Heating” button is pressed after the temperature setting. When the real
temperature is higher than the set temperature, the indicator of
heating will turn off. However, the heating function would not be
turned off automatically if the ultrasonic cleaning still works, it
will start again when the water temperature is lower than the set
temperature. In this case, you can only press “Heating” to turn off heating function. However, if the ultrasonic cleaning
time runs out, the heating function will stop automatically.
3. Time setting: Press the “TIME-/ TIME+ ”shortly at a time means time increase/reduce 1min at a time,
press and hold means time will increase/reduce by 10mins
continuously. The cleaning stops when the timer counts down to
00:00. If the unit needs to be stopped before the timer runs up,
press “Ultrasonic” button.
4. Power Controller: the power can be adjusted among 0% and 100%.
Users can adjust the power value randomly based on the characters
of the stuffs to be cleaned.
5. After time and temperature setting, press “Ultrasonic” or ”Heating” button to start both functions. Press “Ultrasonic ” or ”Heating” button again, the Ultrasonic or heating function will stop.
6. “Filter”: the filtration system with a sparger can be started or stopped by
pressing “Filter” button.
Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
