135L Industrial Ultrasonic Washing Machine With Heater And Timer

135L Industrial Ultrasonic Cleaning Bath With Heater and Timer


What is Ultrasonic Cleaning?

Ultrasonic cleaning uses ultrasonic energy in an immersion cleaning tank to assist in the removal of tenacious or stubborn soils from parts. An ultrasonic system always consists of at least three main components:
1. A tank to hold the cleaning fluid and the dirty parts
2. A generator to transform the line voltage into an ultrasonic signal
3. Transducers to convert the ultrasonic electrical signal into mechanical energy

How does Ultrasonic Cleaning Work?

An ultrasonic system works by inducing controlled cavitation in the cleaning fluid. Cavitation refers to microscopic voids or "bubbles" that form when the transducers emit sufficient ultrasonic energy into the fluid. The cavitation bubbles form relatively slowly and then collapse suddenly, releasing tremendous energy against the surfaces of objects immersed in the tank that ‘scrubs’ hard to remove soils from the parts.

Application

Industrial ultrasonic cleaner are suitable to clean irregular and complex specialized instruments, components and PCBs of sundry shops, workshops, factories etc.You could check the comparison from the picture below.

· Jewelry especially gold, silver & platinum
· Watchstraps
· Coins and other collectibles
· PCB Boards etc
· Engine/Model parts
· Toothbrushes & Dentures
· Electrical components
· Make-up cases
· Diesel injection pumps
· Printer heads and toner cartridges
· Motorcycle radiators
· Vehicle differentials
· Milking parlor equipment·
· Golf clubs&grips&golf balls
. Horse bits&stirrups &horse brasses
· Tattoo needles· Surgical equipment


Why you choose us:

• Are more effective at removing contaminants;
• Are quicker to get a good cleaning effect;
• Save labor time of employees (and subsequent labor cost);
• can heat the cleaning solutions to a suitable cleaning temperature so as to enhance the cleaning efficiency;
• Have a digital controller of high-precision and a long service-life;· Are of high performance;
• reduce chemicals in the cleaned stuffs;· Are environment friendly because of its recyclability
• there is no MOQ in our factory.
• Could customized the model for you.
• 1year warranty.
• engineer's technology support
• heating and power adjustable

Specification

Plug

Certifications

All Dekang’s standard products have achieved most international standards, such as CE certification, RoHS certification, FCC certification etc. Besides, all no-standard products also can satisfy all requirements of these most international standards.

How to use it

1. Fill the stainless steel tank with cleaning solution; turn the single phase switch or three phases switch on; After power-on, the LED display of the temperature displays the actual environmental temperature; while the LED display of time displays 3 minutes (default ultrasonic time).

2. Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase/ reduce 1℃ at a time, press and hold there means time will increase/decrease by 10℃ .

Note: Usually, the best cleaning temperature is within 40℃ to 60℃. The temperature displayed is the real temperature. The default value of the temperature is 0℃. When you set temperature, the heating function can not be started unless the set temperature is higher than the environmental temperature and the “Heating” button is pressed after the temperature setting. When the real temperature is higher than the set temperature, the indicator of heating will turn off. However, the heating function would not be turned off automatically if the ultrasonic cleaning still works, it will start again when the water temperature is lower than the set temperature. In this case, you can only press “Heating” to turn off heating function. However, if the ultrasonic cleaning time runs out, the heating function will stop automatically.

3. Time setting: Press the “TIME-/ TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will increase/reduce by 10mins continuously. The cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the timer runs up, press “Ultrasonic” button.

4. After time and temperature setting, press “Ultrasonic” or ”Heating” button to start both functions. Press “Ultrasonic ” or ”Heating” button again, the Ultrasonic or heating function will stop.

5. Power Controller: the power can be adjusted among 0% and 100%. Users can adjust the power value randomly based on the characters of the stuffs to be cleaned.

6. “Filter”: the filtration system with a sparger can be started or stopped by pressing “Filter” button.
Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.

Express

Include: TNT, UPS, FedEx, EMS, DHL, ect. Also you could pick the goods by your courier and we wouldn't charge it.

Shenzhen DeKang Electronic Cleaning Appliances Co.,LTD is a comprehensive new high-tech enterprise which focuses on the research & development, production and sale of commercial, household, industrial high-power ultrasonic cleaners etc. Especially, we also can customize non-standard products according to customers’ requirements.

Our R&D department can be divided into five sections: mechanical structure design section, electronic design section, software developing section, graphic design section, testing section. All members are excellent engineers who have at least 5 years’ R&D experience. They are good at introducing most advanced technologies in the world into our products and make some innovative improvement. Especially they also pay much attention to cooperation with some institutes or excellent professors of colleges in China. Besides, we also spend a lot of money on purchasing new advanced equipments for R&D and production of new products every year.

Now our products are composed of household ultrasonic cleaners, smart ultrasonic cleaners, digital ultrasonic cleaners, mechanical ultrasonic cleaner, industrial ultrasonic cleaners etc. All of our standard products have achieved most international standards, such as CE certification, RoHS certification, FCC certification etc. Besides, Dekang also have strict examining procedures for controlling the quality of non-standard products.

As to DeKang’s VIP customers, they can get latest product information and free samples of our new products which cost less than a certain amount when they just appear on the market. Besides, Dekang provides 1 year’s warranty for all of our products. Any defective products may be replaced by new products unless they are broken intentionally. Moreover, Dekang launches several online inquiry platforms and technical discussion forum. Any customers can make an inquiry or ask technical questions online. Especially, customers can follow Dekang on Facebook, Twitter, VK, Linkedin, Google+, Youtube etc.

Customer-oriented! Professional! Good faith! Continuous innovative! Rigorous!

Dekang always pays attention to cooperation with partners, and tries to make a win-win situation with them. Be serious with their requirements, spare no effort to satisfy them. DeKang, your super partner!