Floating Single Pass Honing Tools With Integral Electroplate Sleeve
This single pass honing tool can be processed into a through hole,
a semi-blind hole, a keyway hole, a keyway hole and etc, and been
application in engine fuel injection pump, connecting rod, fork,
hydraulic valve body, valve sleeve, air bearing, confidential gear,
mold guide sleeve,air conditioning compressor main and auxiliary
bearings, pistons, metering ring gauges and other high-precision
internal hole processing requirements.
The single stroke honing tool works for finishing bores at a
minimum of Φ2mm, and is all equipped with thrust pads. In addition,
depending on honing and finishing processes, this bore finishing
tool come in four types: vertical honing tool, horizontal honing
tool, vertical cylinder honing tool, and horizontal cylinder honing
tool. Specific product descriptions are as follows.
Floating Single Pass Honing Tools
Sleeve Diameter≥Ø12
| D | mandrel length | L1 | L2 | D1 | S | ML |
| 12～13 | 289.5 | 45 | 20 | M12 | 80 | 40 |
| 14～15 | 289.5 | 45 | 20 | M12 | 80 | 40 |
| 16～18 | 289.5 | 45 | 20 | M12 | 80 | 40 |
| 19～20 | 289.5 | 45 | 20 | M12 | 80 | 40 |
| 21～22 | 289.5 | 45 | 20 | M12 | 80 | 40/60 |
| 23～24 | 289.5 | 45 | 20 | M12 | 80 | 40/60 |
| 24～25 | 289.5 | 45 | 20 | M12 | 80 | 40/60 |
| 25～26 | 289.5 | 45 | 20 | M12 | 80 | 40/60 |
| 26～28 | 289.5 | 45 | 20 | M12 | 80 | 40/60 |
We can design according your requirement.
Connection size:
