| Ethernet & Fiber | |
| Standards | IEEE802.3 10Base-T | |
| IEEE802.3u 100Base-TX | |
| IEEE802.3ab 1000Base-T | |
| IEEE802.3z 1000Base-X (Fiber) | |
| IEEE802.3x Flow Control | |
| IEEE802.1q VLAN Bridge Operation | |
| IEEE802.3af Power over Ethernet | |
| IEEE802.3at Power over Ethernet | |
| Processing Type | Store-and-Forward (2.5M cache) | |
| System Mode | Standard/VLAN Isolation | |
| Switch Fabric | 20 Gbps | |
| MAC address | 8K | |
| Forward Filter Rate | 14,880pps (10Mbps) | |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Ethernet Port | 8 x 10/100/1000Mbps RJ45 Ethernet Ports | |
| Optical Port | 2 x SFP 1000Base-FX | |
| Electrical and Mechanical | |
| Input Power (AC/DC 2 power) | 48~57VDC or 100~265VAC 50/60Hz | |
| Power Consumption | 20W Max. (PoE not in use) | |
| 150W Max. (PoE in use) | |
| LED Indicators | |
| Power | Power Status | |
| 9-10 | Port Fiber | |
| PoE Green | 48V PoE | |
| PoE Orange | 24V PoE | |
| Link Orange | 1000M Speed | |
| Link Green | 10/100M Speed | |
| PoE | |
| Standard | IEEE802.3af/at | |
| Port | RJ45 Port1~Port4 | |
| Max. Power per port | 30W Max per port (Alternative B mode) | |
| PoE Output Auto-sensing | Support both Active and Passive PD without setting | |
| PoE Interfaces | PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+; 7, 8-) | |
| Function | Support Overcurrent, Shortcurrent, OverVOL, UnderVOL, Power
Limitation, Safe Function HiPower PD star BOOT, After Boot | |
| Mechanical | |
| Dimensions (L x W x H) | 210 x 140 x 45 mm | |
| Weight | 1.5Kg | |
| Casing | Metal Case | |
| Mounting options | Wall-mount and desk/shelf mounting | |
| Environmental | |
| Operation Temperature | 0°C to 40°C (32°F to 104°F) | |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) | |
| Relative Humidity | 5% to 90% non-condensing | |
| MTBF | > 200,000 hrs | |
| Regulatory Approvals | |
| ISO9001,CE, FCC, RoHS | |
| WEB software function | |
| Standards | IEEE 802.3x
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
IEEE 802.3ad
IEEE 802.3q, IEEE 802.3q/p
IEEE 802.1w, IEEE 802.1d, IEEE 802.1S |
| MAC Address | 8K MAC addresses; MAC address learning and aging |
| VLAN | 4k VLANS; Port-based VLANs; 802.1Q VLAN |
| Spanning Tree | STP(Spanning Tree Protocol)
RSTP/MSTP( Rapid Spanning Tree Protocol)
PPS ring network protocol
EAPS ring network protocol
802.1x argumentation agreement |
| Link Aggregation | Max 8 aggregation groups, each supports 8 ports
Static aggregation and dynamic aggregation |
| Port Mirror | Many-to-one port mirroring |
| LoopGuard | Loop protection function, real-time detection, rapid alarm,
accurate positioning, intelligent blocking, automatic recovery |
| isolation | Support downlink ports isolated from each other and communicate
with upstream port |
| Port flow control | Half duplex based back pressure control
Full duplex based on PAUSE frames |
| line rate | Support port based input / output bandwidth management |
| IGMP Snooping | IGMPv1/2/3 and MLDv1/2 Snooping
GMRP protocol registration
Multicast address management, multicast VLAN, multicast routing
ports, static multicast addresses |
| DHCP | DHCP Snoping |
| Storm suppression | Unknown unicast, multicast, unknown multicast, storm suppression of
broadcast type
Storm suppression based on bandwidth tuning and storm filtering |
| Security | User port+IP address+MAC
ACL based on IP and MAC
Security properties of port based MAC address quantities |
| QOS | 802.1p port queue priority algorithm
Cos/Tos, QOS sign
WRR (Weighted Round Robin),Weighted priority rotation algorithm
WRR, SP, WFQ, 3 priority scheduling models |
| Port | Auto-MDIX ; Auto negotiation |
| System maintenance | Upgrade package upload; system log view
WEB restore factory configuration |
| Management and maintenance | WEB NMS
Remote configuration and maintenance using Telnet
SNMP V1/V2/V3；SSHV1/V2
RMON |
