Scope editing
Precision filters are widely used in petrochemical, natural gas,
paint, paint, ink, medicine, biological engineering, automobile
manufacturing,
electronics, electroplating, food, beverage and other fields, is
all kinds of liquid filtration, clarification, purification of the
ideal equipment.
Petrochemical and chemical industries: hydrogen peroxide, resin,
lubricating oil, polymer, viscose, aviation coal and various oil
products,
catalysts, various kinds of fluid purification in the manufacturing
process of chemical fiber, separation and recovery of chemical
intermediate
products and chemical products;
Oil and natural gas industry: CNG filtration of gas filling
station, desulfurization of amine solution and dehydrating agent
filtration, separation
and purification of natural gas and refinery, oilfield water
injection, workover, acidified liquid filtration;
Coating, paint, ink industry: latex paint, paint raw materials and
solvent filtration, printing ink, printing ink and additives;
Pharmaceutical and bioengineering industries: pharmaceutical water
for infusion (LVP and SVP), plasma and serum of biological
products,
various pharmaceutical intermediates, pharmaceutical raw materials,
solvent filtration, CIP filtration, fermentation tank inlet gas and
exhaust gas
sterilization filtration;
Automobile manufacturing industry: electrophoresis paint, topcoat,
ultrafiltration water, pretreatment fluid, vehicle spray water,
engine
crankshaft manufacturing coolant, industrial gas for painting and
gas purification in painting room;
Electronics, electroplating industry: liquid crystal display,
photoengraving machine, CD, copper foil, integrated circuit and
other microelectronics
and electronic products manufacturing process of various chemicals
and treatment, electroplating liquid, process gas purification and
purification room gas filtration;
Food, beverage, wine industry: wine, yellow wine, white wine, beer,
fruit wine, sake, fruit juice, tea beverage, soy milk, dairy
products, bottled
water, edible oil, vinegar, monosodium glutamate and other food
additives manufacturing process purification and sterile treatment.
Edit installation instructions
1. Thoroughly clean the filter housing.
2. The inlet and outlet of the clean shell are connected with the
filtration system pipeline. Pay attention to the direction when
connecting, and
ensure that the filter element is in the state of outer water inlet
and inner water outlet.
3. Open the plastic bag at the open end of the filter element and
check whether the o-ring is intact and in place.
4. Wet the o-ring and the cartridge socket with suitable wetting
agent (e.g. water).
5. Hold the filter element close to one end of the o-ring and
vertically insert the filter element socket into the filter element
socket.
6. After all the filter elements are inserted, remove the packaging
bag of the filter elements, fasten the clamp plate, and then
install the metal
cover shell.
7. Open the vent valve on the top of the housing.
8. Slightly open the inlet valve to allow the liquid to enter the
shell until the liquid is released from the air release valve on
the top of the shell.
Close the air release valve at this time.
9. Slowly adjust and open the downstream outlet valve until it is
fully opened.
10. Slowly adjust and open the inlet valve until it is fully
opened. At this time, the pressure drop between the upper and lower
reaches of the
filter is 0.02mpa (determine the initial pressure drop under the
flow).
