The sizes of these pores are between the 1-50 micron.
The capacity depends on the surface area from the bags. Bigger
systems can clean up to more than 500 m3 /h (multi bag filters)
There are special bags for various chemicals.
Engineering
The liquid flows from the top of the filter house (manufactured in
either stainless or epoxy coated carbon steel) and is distributed
equally
amongst the bags. The liquid comes out at the bottom leaving the
dirt behind.
Since the bag is locked in at the top of the vessel all the dirt is
trapped inside the bag. The filter vessel never requires cleaning
after use.
Bag filters systems are applied is various industries solutions.
Treated liquids include: milk products, paint, lime, beer etc.
It can also help you with replacement from various filter bags.
01.Small probability for side-bag leakage , which effectively
guarantee the filtering quality.
02.Bag type filter can bear greater working pressure, it is of
small pressure loss,low operation cost and obvious energy saving .
03.Accuracy of filtration bag increased continuously, it could
reach 0.5 μm at most.
04.Bag type filter large handling capacity, small volume,
containing a large quantity of pollutants.
05.Based on the working principle and structure of Bag type
filtering system,which is convenient to replace the filter bag and
without
cleaning,and time saving and labor saving.
06.Filtration bag could be use repeated after cleaning to save
cost.
07.bag filter application scope is broad, with flexible operation
and multiple installation
