MF800 Plastic Pulverizer Machine for HDPE PE LDPE LLDPE Plastic
MF800 is Huibang's biggest model at present. It is widely used in
grinding materials that is of moderate hardness. For example PE,
PVC, PP, ABS, PA, EVA, PET, PS, PPS, EPS, PC, Styrofoam, Cow
leather and so on. MF800 plastic pulverizer machine takes in the
advanced technologies from Europe and combines with advanced design
concept and market demand. Due to this reason, we solved the
problem of low output and high energy consumption. Over the years,
we have improved the large,medium and small plastic mill. At the
same time, customers are satisfied with our high quality products
and perfect service.
Characteristics:
1.With water cycle and wind cooling, the machine can be applied
into processing heat sensitive material.
2.With the tail-wagging air stream (partly eddy flow) produced by
the tail-wagging of the main shaft capstan of the machine, the
input tail-wagging materials collide strongly with the board and
the cutting blade, and was grinded into powdery (without sieving).
3.Both the board and the cutting blade are made of
abrasion-resistant steel, with excellent performance after heat
treatment.
4.With severeness of framework, the volume of the machine is quite
small. If you open door closure, you can maintain it. It is
completely airproof and without any dust leakage.
5.With winding reclaiming equipment, the machine is features by
cooling materials evenly, quick cooling and some other
characteristics.
| Type | Main Motor(KW) | Total Power(KW) | Weight(KG) | Capacity(KG/H) |
| MCF-400 | 22 | 28 | 1780 | 50-300 |
| MCF-500 | 37 | 45 | 2380 | 80-500 |
| MCF-600 | 45/55 | 55/65 | 2780 | 120-800 |
| MCF-800 | 75 | 89 | 3680 | 200-1200 |
Specifications are not binding and subject to change without
notice.
Founded in 2006, we have many years experience in exporting the
plastic pulverizer machine, we HUIBANG warmly welcome you and your
colleges to visit us, check the plastic pulverizer machine at sight
and discuss the business for plastic pulverizer machine.
A number of factors need to be considered for the selection of the
correct sized pulverizer. To make it easier to get a quote for
HUIBANG Precooling Plastic Pulverizer Machine for 80 mesh PE
Plastic, please let us know the following answers.
- Type of Plastic: MFI (Melt Flow Index)
- Size of regrind to be fed into the pulverizer:
- Machine currently using to make regrind?
- What process:(eg. Extrusion, blow molding, etc.)
- Size of powder desired:
- Mesh/Micron size
- Required throughputs per hour:
- Any special characteristics to your particular material:(eg.
Additives etc.)
We warmly welcome you to visit us and check the quality.
No matter at the exhibition or the workshop.
