OEM ODM Custom tungsten carbide molds ,component , inserts
,wear-resistant parts
PRODUCT FEATURES
1. Grades can be designed according to your requirements and stone
diversity. Our engineers
provide helpful suggestions for you.
2. 100% precise raw material makes longer using life.
3. Precise molds produce products with more accurate dimension.
4. Strict products filtering ensure reaching to qualified standard.
5. Enhancement of processing reduced inferior products, increased
wear resistance.
6. Full selections of types, grades, sizes available, decreasing
your cost and shortening delivery time.
Physical and mechanical properties of grades and applications
recommended
| Grade | Physical& mechanical properties | applications recommended |
Premium grade | Density g/cm³ | Hardness HRA | TRA n/m㎡ |
| YG6 | 14.85-15.05 | ≥89.5 | ≥1670 | It is suitable for the semi-finishing and finishing of nonferrous metals and nonmetallic materials, for finishing of small sections, roughing of threads, and semi-finishing milling and finishing milling of continuous sections and for broaching,etc. |
| YG6X | 14.85-15.05 | ≥91.0 | ≥1560 | This cemented carbide is suitable for maching chilled alloy cast iron and heat resistant alloys with good results. It is suitable
for the finishing of normal cast iron. |
| YG6A | 14.85-15.05 | ≥91.5 | ≥1510 | It is suitable for the semi-finishing of hard cast iron, nonferrous metals and its alloys and it is saso suitable for the
semi-finishing and finishing of parts of high manganese steel. |
| YG8 | 14.65-14.85 | ≥89.0 | ≥1840 | It is suitable for the intermittent rough turning, planing, and
milling of uneven surfaces of non-ferrous metals and nonmetallic materials. And it is also used for drilling of normal holes and depth holes
and for broaching. |
| YG8C | 14.55-14.75 | ≥87.5 | ≥2000 | It is suitable for making rotary percussice drill bits for drilling
medium hard and hard rock formation of f=14 and below and auger bits for drilling mining layer overlayed with hard rocks. it is also for
making oil drill bits and for percussive drill bits for driling hard and
cutting super hard stones. |
| YG11C | 14.20-14.40 | ≥86.5 | ≥2260 | It is suitable for making drill bits with mining tips or buttons
for heavy duty drilling machines for drilling hard rock formations, various
tricone bits. It is also suitable for making drills for drilling stone
walls and cement in construction and installation projects. |
| YG11-N | 14.35-14.55 | ≥87.0 | ≥2420 | It is suitable for making snow ploughs, percussive rotary rock
drilling drill bits for drilling medium hard and hard rock formations. |
| YL10.2 | 14.40-14.55 | ≥90.9 | ≥1610 | With very high TRS and good wear resistance, it is suitable for the
low speed roughing and milling of heat resistant alloys, titanium
alloys and also for machining fibre reinforced plastics. |
| YS2T | 14.35-14.55 | ≥91.5 | ≥1960 | It is sutable for low speed roughing and milling of heat resistant
alloys and titanium alloys and it is optimum for making parting inserts
and screwed taps. |
| YS25 | 12.95-13.15 | ≥90.5 | ≥1780 | Suitable for the finishing and semifinishing of steel and cast
steel and also for the milling of steel and cast steel YS25 is specially used
for the milling of steel and cast steel. |
