Fully Automatic Composite Partition MGO Board Production Line
1.The MgO board is environmental friendly, high fireproof and
waterproof, can be painted, laminated. nailed and sawn.
It is widely used for ceiling, wall panel, decorating of indoor
wall and lining board for furniture.
MgO board can replace three-ply board, five-ply board, flakeboard,
MDF (Medium Density Fiberboard ) and Gypsum Board.
2.MgO Board performance:
A. Oxygenic index%: >90
B. Level combustion: SO
C. Vertical combustion: SO
D. Water content rate: 10.9%
E. Capacity: 1.15g/cm3
F. Static bending intensity: 169.46Mpa
G. Density: T/ m3 1.13
H. Water resistance: Without chalking for 24 hours and there is no
change on surface
I. No “Three-wastes” (waste water, waste gas and waste residue), no
pollution and environmental protection
3.Mgo board specifications:
| thickness | 3-20mm |
| length*width | 2440*1220mm 2400*900mm 3000*1200mm 2750*1200mm |
Company Information
The company was divided into R&D center of plasterboard
equipment ,manufacturing
base and machinery Import & Export company. Our products are
exported to Asia,Europe,and Middle East etc.LVJOE
has 300 employees, including 6 professor senior engineers, over 40
of senior technical staff,Our core product:plasterboard
production line(also known asdrywall production line, paper faced
gypsum board production line),gypsum ceiling board
equipment and laminating machine of various materials.
Best regards
James Yang
ADD: 17th, NanYan Road Economical and Technological
Development Zone,Shijiazhuang City,Hebei,China
Mobile Phone:+8615832254694
WeChat:15832254694
E-mail:lvjoe3@greensontech.com
Forming line and batching platform
The forming line is the mainframe for the whole line. Mixed wet
slurry is fed onto moulding board moving with constant
speed, via a storage tank and feeder.
