Mgo board machine adopts the automatic template device to save the
labour cost. It also adopts automatic coating release agent system,
by this way the release agent is evenly, less dosage and clean.
Roller and forming roller precision is high that makes the board
uniform thickness and smooth. Automatic cutting film system adopts
fixed length cutting method, cutter does not hurt the template.
Flowchart and Equipment Parts
1. Production Line
MgO board making machine can produce all kinds of magnesium oxide
boards, they can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture. It can replace
three-ply board, five-ply board, flake board, MDF (Medium Density
Fiberboard ) and Gypsum Board. It is really environment product and
lower cost.
2. Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some
inorganic chemical materials at one time after roller-extruding.
The source of raw materials is widely and they are purchased easily
for customers.
3. Technology features
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at
one time after roller-extruding under the conditions of normal
temperature and normal pressure. This is a green
environmental-protection project, because that there is no waste
water, waste materials and waste gas during its production
processing. The finished board doesn't need high temperature
drying, air-drying and watering, and under the normal temperature,
they will dry well indoor.
4. Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and small-scale. Our all equipment can
produce board with same quality and specification but different
production.
Specification:
| Product size | length*wideth:1220*2440mm thickness:3,6,10,12,18mm |
| Product capacity | 1200pcs/8 hours(According to10 mm thick wet board calculation) 1 million square meters per year(According to 10 mm thick dry board
calculation) |
| Production line control mode | PLC control system |
FAQ:
Q: Do you make test before shipment?
A: Before shipment, we always test machine fully
Q: Can you guarantee your quality?
A:Of course. We are the manufacture factory. More important, we put
a high value on our reputation. Best quality is our principle all
the time. You can be assured on our production completely.
Q: How about after-sales service ?
A: 1 year free warranty, Lifetime technical service support.
Q: How can I install the production line and get a commissioning ?
A: Engineers available to service Overseas. Relevant cost will be
paid by you.
Contact Way:
Zizi Li
Wechat/WhatsApp:17732172215
Skype: +86 16630111157
