2100kVA Adjusting Inductance Type Series Resonance Test system

Adjusting inductance type series resonance test device

1. Subject
For the Suwa Hydropower Station 300MW, the extreme rated voltage is 18kV, the earth capacitance does not exceed 2.58μF, the AC withstand voltage test, the test voltage is 50kV, and the withstand voltage time is 5min.

2. System capacity
For the Suwa Hydropower Station 300MW, the extreme rated voltage is 18kV, the earth capacitance does not exceed 2.58μF, the AC withstand voltage test, the test voltage is 50kV, and the withstand voltage time is 5min. then:
During the test, the high-voltage side current is I=2πfCU=2π×50×2.58×10-6×50×103=40.53A; the rated current of the system is set at 42A, and the rated voltage is set at 50kV, leaving a certain margin.
The overall specification design is 2100kVA/50kV, of which the adjustable reactor is 800kVA/50kV (16A); one fixed reactor, with two parameters of 650kVA/50kV/13H; it can meet the withstand voltage requirements of the 0～2.58μF test product.
In summary: 2100kVA/50kV can meet the withstand voltage requirements of 2.54μF test product

3. The main technical parameters and functions of the system
1. Rated capacity: 2100kVA;
2. Rated voltage: 50kV;
3. Rated current: 42A;
4. Working frequency: power frequency 50Hz;
5. The output voltage waveform distortion rate: ≤1%;
6. Allowed continuous working time: 5min under rated load, 1.1 times overvoltage for 1 minute;
7. The temperature rise after continuous operation for 5 minutes under rated load is ≤65K;
8. The quality factor of the device itself: Q≥30;
9. High pressure measurement accuracy: effective value 1.5;
10. Input power: three-phase 380V voltage, frequency 50Hz;
11. The test product has overcurrent, overvoltage and test product flashover protection functions;
12. Ambient temperature: -250C-450C, relative humidity: ≤90%RH, altitude ≤3200 meters.

4. Introduction to the principle of series resonance
The series resonance test system is a device used to perform AC withstand voltage tests on various capacitive test products. It is characterized by greatly reducing the capacity of the input power required for the test, reducing the volume and weight of the test equipment, making the field test easy to implement; and greatly reducing the labor and material costs of the test equipment and the input required for the test.
Fanke has been engaged in the development and production of high-voltage test equipment for more than 20 years, and the resonant system is the flagship product of Fanke. At present, hundreds of resonant systems produced by Fanke have been successfully used in various fields of power systems at home and abroad.
The series resonance system is divided into tuned inductance resonance and frequency modulation resonance. The two resonances achieve resonance in different ways. The tuned inductance type makes the test circuit resonate by adjusting the inductance, while the frequency modulation type makes the test circuit resonate by adjusting the test frequency. . But the result is the same, that is, the large-capacity output required by the test product can be obtained by inputting a small-capacity power supply. The principle diagram of resonance is shown in Figure

Founded in 2003, FANKE is the domestic leader specializing in designing and manufacturing HV test, measurement and overhaul equipments. In 2003, Wuhan HIGHVOLT Co.,Ltd is established as our subsidiary. We provide a diversity of complete testing solutions and one-stop service for electric power companies, electric research institutions and electric equipments manufacture companies.
Located in Guannan Science and Technology Industrial park-- the Optical Valley of China, we cover an area of 12,000 square meters used for workshop and offices.With the registered capital of 16,000,000 yuan, our annual sales volume reaches 70,000,000 yuan. As a sub-measurement unit of Wuhan city, we develop us as a comprehensive high-tech enterprise integrating research, development, production, installation, commission, sales and service consultancy.

Good networking keeps us stay advantageous and innovative in the market. Relied on the wide cooperation with institutions of higher learning in Wuhan, we establish a HV research center supported by professional HV engineers and specialists from Wuhan High Voltage Research Institute of State Grid, Institute of Water Conservancy and Hydroelectric Power of Huazhong University of Science &Technology and Wuhan University.

Our management team is composed of professional administrators with rich experience in modern business and project management and technical personnel specializing in HV, power transmission, transformation and automation. Until now, we employ 75 stable workers, 65% of whom have bachelor degree and some of the rest are advanced engineers and professional experts with Doctor degree.

We hold numerous intellectual property rights, utility model and invention patents for products, such as hydraulic integrated high voltage withstand test system, series resonant test trail, ultra high voltage AC/DC voltage withstand test equipment, power frequency PD free voltage withstand test equipment and other electric power maintenance equipments as well as other tailor-made products.
Our products have been applied for onsite handover, preventive maintenance and quality inspection test. We have customers all around the country, including stated-owned institutions and large-scaled enterprises in sections of railway, oil industry and chemical engineering. Some products have been exported to overseas markets, including USA, Mid-east, Korea, India and Vietnam, ect.

With a vision to win-win result, We will continue to focus on customer needs and rely on technical innovation, striving to become the top-ranking provider for electric testing and measurement equipments and EPC engineering service.