Taper shaft hollow shaft encoder KN35 thickness 35mm ABZUVW 12
phase line driver output
Quick description for KN35 incremental encoder
Encoder type: Incremental encoder
External diameter: 35mm
Thickness: 18mm
Installation dimension: R13.5mm, R14.5mm, R20mm
Hollow shaft type: blind hole; through hole, taper hole
Hollow shaft diameter: 6mm,7mm;8mm;10mm
Package: Carton box
Net weight : About 80g (with package)
Some Part number of KN35 for ordering
KN35-J12C2500/8Z7
KN35-J6C2000B8
KN35-J12E5000/8Z7
KN35-J12C4096/6Q8
KN35-J3N1024Q6
KN35-J3V2048Z7
KN35-J3F3600B6
KN35-J12C2000/6Z7
KN35-J12C2500/6Z7
Characteristics for KN35 encoder
| Items | Basic parameters |
| Encoder type | Incremental encoder |
| Hollow shaft diameter | 6mm,7mm;8mm;10mm |
| Resolution | 1024;2048;2500;3600;5000;7200;10000;14400 |
| 1000/4;1000/6;1000/8;1024/4;1024/6；1024/8；2000/4；2000/6；2000/8；2048/4；2048/6;2048/8；2500/4；2500/6；2500/8;4096/4;4096/6;4096/8;5000/4;5000/6;5000/8 |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8--30V |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output |
| Push-pull output |
| line drive (26LS31) TTL |
| line drive(DC8-30V) HTL |
| TTL(DC5V) phase ABZ are back of phase UVW |
| Protection grade | IP40 |
| Cable length | 500mm |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| Insulation strength | AC500V 60s |
| Insulation resistance | 10MΩ |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
| starting torque | less than 5.9x 10-3 N.m |
| Intertia moment | less than 1.5x 10-6kg.m2 |
| Shaft load | Radial 30N; Axial 20N |
| Slew speed | 5000RPM |
| Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
| Environmental temperature | Operating:-20 ～+100°C；storage:-25 ～+100°C |
| Environmental humidity | Operating and storage: 35-85%RH(noncondensing) |
| Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
| Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
| Shell Material | die cast aluminum |
| Certification | CE |
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and
ship on time
Why choose us?
HENGXIANG brand--The trustworthy partner
CE approved--advantaged product quality;
Fast delivery--strong stock product ability;
Factory directly provide a competitive price;
One-stop service--for your efficient purchasing experience;
OEM design accepted--customized design, your own brand accepted.
