K5004 K5000 K5002 K5005 Diaphragm Kit For Goyen Pulse Valve CA50T
CA62T
Brief introduction of electromagnetic pulse valve diaphragm:
K5004 (M1638A), K5002 (M1639A), K5005 (M1639A), K5000 Diaphragm for
Goyen pulse valve CA50T, RCA50T, CA62T, RCA62T; NBR material is
standard, working temperature range is -5 to +80 ℃; material is
optional, for high temperature, working temperature range is -10 to
+120 ℃. Pulse Jet valves are indirect type solenoid valves. When
the solenoid of pulse jet valves gets energized, air trapped in the
diaphragm is exhausted causing pressure difference in the
diaphragm. Then the diaphragm is suddenly opened. When it is
de-energized, air passes through the hole to the chamber which can
balance the air pressure and close the valve. The opening and
closing of the valve are done very fast for filter cleaning and
consumption of compressed air effectively.
| Product Materials | NBR,NR |
| Operating Temperature | -20℃~80℃ |
| Service Life | ≥1000000 times |
| Usage Scenario | Bag filter devices /precipitator equipment |
Working principle:
The electromagnetic pulse valve diaphragm divides the pulse valve
into two air chambers. When the pressure of the rear air chamber
makes the diaphragm close to the air outlet of the valve, the pulse
valve is in a closed state, the pulse controller outputs a signal
to move the armature of the pulse valve, the vent hole of the air
chamber behind the valve is opened, and the rear air chamber
quickly loses pressure, making the The diaphragm moves backward,
the compressed air is blown through the outlet of the valve, the
pulse valve is in the open state, the injection starts, the
electrical signal output by the pulse controller disappears, the
electromagnetic pilot of the pulse valve is reset, the vent hole of
the rear air chamber is closed, and the back When the pressure of
the air chamber rises, the diaphragm of the pulse valve is close to
the air outlet of the valve, the pulse valve is in the closed
state, and the injection stops. The length of the injection time is
controlled by the controller.
Application:
Referred to the dust collector, it applies to waste gas dust
filtering of Cement plant, Steel mill, Power station, Electrolytic
aluminium factory, Incineration plant, crushing mixing conveying of
Chemical plant, crushing mixing sieving grinding of
Pharmaceutical plant, raw material mixing packing of Paper mill,
bagging mixing of Dyeing mill, crushing gagging conveying and
mixing of Fertilizer plant, crushing plasticzation conveying of
Kilns, sawing polishing filing of Log mill, etc.
Our service:
1. Packaging is neutral packing or customized packing.
2. We will reply you within 24 hours.
3. We will also provide you with good after-sales service.
4. OEM or ODM orders are welcomed.
5. Trial orders are acceptable.
6. High quality and factory price.
7. 100% ensured the quality.
