Automatic Laboratory Instrument Rain Test Chamber B-LY Test Chamber
IEC 60529
Equipment function:
The main function of this equipment is to use for electrical and
electronic products, lamps, electric cabinets, electrical
components, automobiles, motorcycles, and their parts and
components. carry out testing. After the test, the quality of the
product can be judged through the verification to meet the
requirements, so that the product can be used in design,
improvement, verification and factory inspection.
Executive standard:
Conforms to IEC 60529:1989 +A1:1999 +A2:2013 Degrees of protection
provided by enclosures (IP Code), and “Enclosure Protection Level
(IP Code)” 14.2.3, 14.2.4 and Figure 4 and GB7000.1. The first part
of the lamps and lanterns: General requirements and tests 9.2.4,
9.2.5 articles and Figure 9.4 requirements.
Rain test box is mainly used in electronic, electrical, aerospace,
and other scientific research units of external lighting, signal
devices and car lamp shell protection test.
Feature:
1. Meet the requirement of IEC60529 standard IPX3 water pouring
test and IPX4 water splash test.
2. The test sample will be put or installed on the center of the
half-round sinuous pipe and make the bottom of the test samples and
the oscillating axis in a horizontal position. During test, the
sample would spin around the center line.
3. Can manual default the test parameters, complete testing
automatically shut off the water supply and pendulum pipe angle
automatic zeroing and automatic eliminate seeper, avoid scale
blockage needle tip.
4. PLC, LCD panel test procedure control box, stainless steel
curved pipe, alloy aluminum frame, stainless steel shell.
5. Servo drive mechanism, guarantee the pendulum pipe angle of
precision, the overall pendulum tube structure for hang a wall.
Model:
| Model | B-LY |
Internal Dim(mm) | custom |
| SOT(mm) | undetermined |
| structural features | Radius of arc pendulum tube | 400mm |
| Right Angle pendulum tube length | 500mm |
| Water jet pressure | 50-400kpa |
| Right Angle swing pipe spray diameter | 16mm |
| Water tank material | High-grade stainless steel plate |
The main technical parameters:
IP6 &UL1598, the external structure: a closed chamber
Inside diameter (L×W× H): 1960 x 1960 x 1900mm
Structure of EN/ UL Rain test chambers:
1,The outside layer is composed of the high quality stainless steel
plate, the inner container is the composed of stainless steel tabula rasa.
2, Large area of visible glass door, easy to observe the test
specimens in the testing chamber
3,The button is made of high quality of tank, can be fixed PU
activities wheel, it is convenient for user moved.
4, With 270 degree swing pipe and 360 degrees whorl pole water jet
device.
5, Adjustable speed samples stage.
Packing/Shipping:
